E-Bladed cocker problem...

[Derman2k]

When I air up my ebladed cocker...Air shoots out of the 5 way..any ideas how to fix it?

[Derman2k]

Now its also leaking out of the QEVs on the Ram...

[p8ntbalr2004]

Turn down your LP reg. That should fix the 5-way. If it doesnt also fix the ram, you may need some sealer, I would not recomend loctite though.

Brett

[Derman2k]

I turned the lpr down all the way and it still leaks...

[p8ntbalr2004]

Where abouts does it leak on the 5-way? and is it a slow leak or gushing?

[Derman2k]

It leaks from under the shroud..Can't really tell where. Its more of a gushing than a slow leak.

[p8ntbalr2004]

Hmmm, that seems to point back to the LPR. Im outa ideas on this one.

Brett

May want to check out the electro cockers forum at PBN.

[Derman2k]

Someone over at Airpowered said it might be the black gasket thing in the noid? So i just oiled taht a little bit and i'm gonna see what happens.

Thanks though.

[p8ntbalr2004]

You can check all the orings, and make sure all the screws are snugg, BUT DO NOT STRIP THEM!! If you strip them, it will leak like no other.

Brett

[UltimatePaintballer]

DID YOU COCK IT BEFORE YOU AIRED IT UP?!?!?!?!?!?

[Derman2k]

I only had about 600 psi left in my tank, but I oiled the black rubber thing thats right under the hoses and just cleaned out all of the dirt and re-teflon taped everything, and it didn't leak, but that was only with the 600 psi so i'm not sure if its fixed yet.

Thanks a lot for the help.


Edit=Ultimate-Yea I did...i'm not that cocker stupid heh but it wasn't out of the barrel and thats where it comes from if you don't cock it...

[p8ntbalr2004]

That was probably the culprit. Also, your inline should be putting less than 600 into the gun, so tank pressure shouldnt have a large effect on it.

He said the leak was out of the 5-way, not the barrel, so im assuming he had the gun cocked. ; )

Brett

[UltimatePaintballer]

well

when i don't cock my cocker it comes out the 3 way

[RenagadeOfFunk]

Re: E-Bladed cocker problem...

Originally posted by Derman2k
When I air up my ebladed cocker...Air shoots out of the 5 way..any ideas how to fix it?

...as a matetr of fact i do...dont use cockers ....get a mag...they dont shoot out of 5 ways...they use barrels...yep that what people use now

[Derman2k]

Re: Re: E-Bladed cocker problem...

Originally posted by RenagadeOfFunkRTPcf


...as a matetr of fact i do...dont use cockers ....get a mag...they dont shoot out of 5 ways...they use barrels...yep that what people use now

Heh...still have my emag

Thanks again for the help Brett.