Misleading. See the oring around the PT Tip? Thats the #6 one they talking about. Its still on the tip.
-
-
1. Backing washer - obviously the flat hard one
2. Power tube O-ring - the white one INSIDE the back of the carrier
3. Carrier O-ring - the black thin one around the outside of the carrier
4. Carrier - obviously the brass things with lines and dots
5. Shims - thin silver washers
6. Power tube O-ring - sealing oring around the Power Tube Tip thats on the tip itself
7. Power tube tip - obvious
8. Superbolt - obvious
9. Main spring - obviousComment
-
Now how are you doing here?
Should be good to go. Might need to check your on off as well. Oil it good. Also what spring are you using here? Should set up the middle spring if you can.Comment
-
Just a slight correction to unka Phils instructions...
1-Flat washer
2-carrier
3-shims(if wanted to fine tune)
4-powertube tip
I believe they should be installed in this order
Comment
-
Hey Tuna!
Yea dang it. I got it basackwards there. Going by the list is not good there is is? Funny how you sit in front of the TV with no reference and get things cornfuzed. :)
OK...fixed thatComment
-
Ok I musta killed him then..... he not coming back is he?
Comment
Comment