can you guys post how much PSI(exactly) you usually run into your retro/x-valves so I can get a clear estimate of where people like to run their's at. If you don't mind can you also tell what tank you use. Even post if you crank up the output to 1000 or even higher.
-
Minimag
retro valve w/lvl 10
Y-grip
warpfeed(12v x-board feeding it)
centerflag preset(subject to change) -
depends what u want your gun to do i use my x-valve between 600 and 1000 and use a max flow 88ci 4500psi system different pressuers acheve different rof's the hight the pressure the better the rof and the easyer 2 walk the trigger the different springs matter 2 the smalest spring in the level 10 can run as low as 550 and the stringer spring i couldnt get it lower than 750 and the middle spring i dont know cuze i havent tried it yet if u want 2 know any thing else pm meComment
-
I use a pmi pre-set and a crossfire pre-set. I like the crossfire better. It seems that its putting out more than the PE. I just haven't ever checked it with a gauge. The PE puts out right around 800, and it is reactive enough. Maybe my crossfire is more reactive cause its new and not really broken in yet. But if you are wondering 800psi is plenty to hit 13-14 if you're that fast.Comment
Comment