Mag venting out front very bad?

[RRfireblade]

???

I use preset screw in tanks on all my Mags.

[Mindflux]

Originally posted by RRfireblade
???

I use preset screw in tanks on all my Mags.

That's why I found it curious.

I'm not sure what to think now?


How do I remedy this.

[RRfireblade]

Pulling the trigger when you gas it up would take care of that if that was the prob.

[Mindflux]

Originally posted by RRfireblade
Pulling the trigger when you gas it up would take care of that if that was the prob.

But it's still not something I should have to do right? I mean you don't do that?


... I want to find the cause of why this suddenly happened.

[RRfireblade]

Your going to have to get more air but I would start at square one again.Pull any the shims the L10 and put the shortest spring on.Start with a tight carrier and o-ring combo.Pull the shims from the ULT.Gas it up and see what happens.Get the L10 so it won't leak first,then add 2 shims for starters.See if it fires at all.Then try tuning from there.

Either that or your going to have to send it to AGD or someonr to be worked on.

[RRfireblade]

Originally posted by Mindflux

But it's still not something I should have to do right? I mean you don't do that?

Even though you don't always HAVE to,that is the way AGD suggests you air up a Mag.

[Mindflux]

Originally posted by RRfireblade
Your going to have to get more air but I would start at square one again.Pull any the shims the L10 and put the shortest spring on.Start with a tight carrier and o-ring combo.Pull the shims from the ULT.Gas it up and see what happens.Get the L10 so it won't leak first,then add 2 shims for starters.See if it fires at all.Then try tuning from there.

Either that or your going to have to send it to AGD or someonr to be worked on.

There are no shims in my LX setup. I am currently USING the shortest spring, anything bigger and the mag trigger is completely limp and it wont fire at all.

If I go one carrier down in size, it is a VERY tight fit.

This thing was tuned by Tunaman (made by him)... I got it, dry fired 500 or so shots through it... then the trigger problem happened. Talked to mango and he told me to swap to the shortest spring, all was fine minus some chuffing, pinching and sometimes the bolt wouldn't reset. And then now this, as of Saturday night. The mag has only ONLY seen the field once.

[RRfireblade]

Sounds like it should go back to Tuna then I guess.There's only so much you can do over the net.

Wish I could be better help.

[Mindflux]

Originally posted by RRfireblade
Sounds like it should go back to Tuna then I guess.There's only so much you can do over the net.

Wish I could be better help.

Well Once I get air I'll start over with the whole process. However it's just insanely frustrating to have a two week old mag that's being less reliable than my 3 year old shutter.

It's probably nothing serious, of course. It's just frustarating.


Edit: I guess at the very worst I can take it to texball in a few weeks and have havoc or someone look at it.