New automag RT

[Wyno20]

I just ordered a automag rt and wonder if there is any way i can take off the chrome sight rail and the other chrome side rail when i use it. i don't like the color so i want to know if anybody has taked them off and if its okay to use then

[Dayspring]

Well, the sight rail on the back end is held on by 6 screws in the rail. That's easy. Just take them out and off.

What other rail are you speaking of?

[Wyno20]

other rail

there is another chrome plate on the sides right next to the foregrip and i don't know if it needs to be on for the gun to work

[Dayspring]

Well, that actually holds the foregrip on. If you want the grip, that has to stay.

[Wyno20]

chrome plate

there is no way to take that off or replace the grip with another grip

[DeerChaser]

Yes you can take it off. You say new, I assume it's an RT Pro. The rail is pre drilled (one hole) I mounted mine with one screw thru the pre drilled hole.

[Wyno20]

Deerchaser, so you are saying i can take both of the chrome sight rail and the chrome plates by the foregrip off the Ule RT and the foregrip will still be connected to the gun

[DeerChaser]

you have too remount it to the rail
this too this

[Wyno20]

Deer Chaser, that gun is sweet, what kind of hoses are those and did you get them from a paintball store

[DeerChaser]

Thanks, that is stainless steel rigid tubing that I custom install. You can't buy it pre bent. The fittings are around $10 each, has a psi rating at 10,300 working pressure. The tubing is 1/4" OD.

[tonybhall]

Logic Paintball

Hey Wayno,

Check out the custom work done at www.logicpaintball.com

They will mill out your rail (drop 65% of the weight) and put a slot in the rail for your foregrip. Cost around $45.00.

I have the same marker, you will love it once the ULT breaks in.

Bryan
Phantom Regiment
Team Mag Daddies

[Smittythemaster]

can the new RT ULE custom foregrip be switched with an old style foregrip (one with the finger grooves) without any modifications?

[tonybhall]

I think so

The top of the new grip is an verticle adaptor just without the pin. Just unsrew the grip and as long as the new grip will screw into a vert. adaptor you should be ok

B-)