Got new Emag & I must say...not impressed. help me!

[anxiouspaintblr]

Ok well ive figured out adjusting the trigger....and I have came to an abrubt stop, the trigger screw that I NEED to adjust is stripped



thats it right there is there anything at all i can do or am i screwed?

sorry for double post.

[lew]

I'll take it off of your hands.

Contact AGD about the trigger rod. Remember that you bought this used, so it may not be in perfect condition. Tear it apart and clean it. That may save you from future headaches, atleast if you know how to disassemble it.

[gibby]

Or send it to BlackVCG...he'll tune that baby right up!

[acropilot19]

Okay Dude...
Go here: Havoc-online.com

Excellent tutorials on everything E/Xmag.

Also, If you want your mag professionally tuned, look up Rogue or havoc or tuna & they'll get that thing runnin sweet.

Dont blame the marker if you received it in poor condition. even excellent guns like Emags are gonna give problems if they're not well maintained. Read Havoc's site & do a search for emag posts & just read, read, read. there is a certain learning curve with any marker & the more you know, the less these problems are gonna slow you down.

I have an Emag just like yours and it ROCKS! It took me a while to learn its ins & outs but it is THE Most reliable marker I've ever used & with a Level-10 bolt you'll Never chop. I also have a storm Timmie with WAS 2.7 but I prefer my mag cause it just works ALL the time.

Once you get it straight you'll see.
Hang in there & do your homework :)

[Target Practice]

Oooo. That sucks. Here is what I would do....

Remove the trigger, cuz it makes the rest of this stuff easy. Take a sufficiently small allen wrench that you can do with out, cuz you're gonna throw it out. You can probably get one at the hardware store, or maybe Home Depot. It is ok if it moves around a bit. Take some locktite, put some on the end of the wrench, then put the wrench into the screw. Let the locktite set, then unscrew it. If you don't have a new one already, keep that screw for reference. Go get a new one, install it, put the trigger back on, and rock away.

Also, if you have the right size EZ-out, and you know how to use it, that works too (even better). So, anyway, those are two ways to do it.

[anxiouspaintblr]

see that metal rod there? right by the "M" it's what hold the trigger in place...can I take it out? jsut so i can do something about thestripped screw?

[Big_Chops]

yes u can take it out. it only comes out one way though cus its tapered(sp?)

[gibby]

yes u can take it out. it only comes out one way though cus its tapered(sp?)

If I can remember correctly, that pin pushes out from the other side of the M. Is that right? At least that's how mine was set up.

[Big_Chops]

i think you are right gibby. mine was that was too

[anxiouspaintblr]

Ok well I avoided taking it out, and my triggers small :) All I did was put a magnet that i found lying around (about the same sixe as the ones found in the trigger) and jsut put it behind there, So its works good in "E" mode because I used the shot counter(no air) but manual is what im worried about :\ the magnet sticks out from the back of the trigger and I have a feeling that it will hit the back of the trigger before it hits the rod. Anyway im going ot get air soon and then I'll know.