Bad_Dog's trigger stop thread

[behemoth]

are you offering this service for any of us taht are worried that we'll fubar our triggers?

Thanks (everything ive touched lately has broken)

-Josh

[Bad_Dog]

are you offering this service for any of us taht are worried that we'll fubar our triggers?

As for the trigger stops, I've already done three triggers via request that I do it for the person seeing as of how they couldnt do it themselves... so I guess that yes, I am now doing the TS mod to triggers for other people. Unfortunatly there are about a bazillion different types of triggers out on the market, so I have to limit myself to the ones that I know; thus I will only install trigger stops on AGD triggers (blade & double). I also wouldnt accept the mod on annoed triggers, unless you want your trigger to be re-annoed; due to the process of filing the holes smooth, the anno would most likley be marred.

If anyone would be interested, PM me, and I'll give you some more information.

[JrnyFan1985]

i tried to attempt your trigger stops and i think i stripped the screw. i just got the back set screw in far enough to allow the marker to fire. however, whenever i tried to go into any type of rapid fire 6bps+, i'd get bolt stick. however, all in all not a bad mod. I just ended up lightening my trigger to get me that .00001g's less weight.

[OhMyAMoose]

Bad Dog - Have you ever thought about doing this mod for people? I would gladly pay you because I dont have all the tools.

[Bad_Dog]

Bad Dog - Have you ever thought about doing this mod for people? I would gladly pay you because I dont have all the tools.

look up 3 posts (at #32)

[JrnyFan1985]

ehh sorry dude, but i'll just save up my money for the deadlywind.

[awwdavy]

Just finished the trigger stop mod and it works great. Cost a total of 5 dollars for the tap, drill, and screw. The only thing u need is a drill, and it doesnt even have to be a good one. THANKS BAD DOG FOR THE GREAT INSTRUCTIONS

[Battlewear]

I third the Sticky!!!

I am planning on doing this soon to my mag.. I dont think my frame and trigger fall into your list of ones that you would do Bad Dog, so I am going to attempt it my self..

The only worry I have at this point is on the vertical potion behind the trigger the hole with the sear pin comes out of is very long, it goes down almost past the start of the second finger in the trigger (obvoiusly a double trigger).

I am concerned about that but a friend of mine said it should be ok, but he owns a cocker, what does he know hehehehe

Keep up the cool work BD, what other cool helpfull mods have you done?

[TheShark]

Any way to do this with the stock carbon fiber frame?

[AGDlover]

after looking at my stock frame you can't get a set screw in the top because you need some flat area on the op for the set screw to hit on the frame it self and you could maby do one on the bottom, it would be low but it can be done. so yes and no

[TheShark]

Well I think the back trigger stop is more important anyway, and I'd be happy with just that if it doesnt take much to accomplish.

[Pickle]

I vote for sticky too. I did this mod and it worked great. I would however, suggest better quality pictures for the less mechanically inclined. They worked for me but may not for others.

In fact Bad Dog, if you take some nice quality pics and spruce it up a bit I'd like to put it on paintball4all.net

[Pain For Pleasure]

Did anyone with an X valve do this? I noticed on mine that I didn't need the bottom one. The trigger would get pushed back before it hit the frame making the bottom one useless. The top one, eh, it didn't take off to much, and it made it a little easier for me to shortstroke. Not much though. Directions and everything were exellent though. I am now looking for just a a blade trigger if anyone wants to trade for one with it already installed. email me, I dont check my Pms often on here. [email protected]

[Bad_Dog]

wow, I've been pretty busy lately so I havent been watching this thread...

Just finished the trigger stop mod and it works great. Cost a total of 5 dollars for the tap, drill, and screw. The only thing u need is a drill, and it doesnt even have to be a good one. THANKS BAD DOG FOR THE GREAT INSTRUCTIONS

excellent, you care to share any pictures?

I am planning on doing this soon to my mag.. I dont think my frame and trigger fall into your list of ones that you would do Bad Dog, so I am going to attempt it my self..

if you've got any questions pop me a PM! I'd be glad to help as much as possible...

Well I think the back trigger stop is more important anyway, and I'd be happy with just that if it doesnt take much to accomplish.

I've never attempted anything on the stock frames, now you've sparked some interest in the subject... I'll take a look into it within the next few days...

I vote for sticky too. I did this mod and it worked great. I would however, suggest better quality pictures for the less mechanically inclined. They worked for me but may not for others.

if I only had a higher quality digital camera!

Did anyone with an X valve do this? I noticed on mine that I didn't need the bottom one. The trigger would get pushed back before it hit the frame making the bottom one useless. The top one, eh, it didn't take off to much, and it made it a little easier for me to shortstroke. Not much though. Directions and everything were exellent though.

Actually I have installed these on a Ygrip for an RT ULE custom, from what I've heard it took a bit of tweaking and tinkering but it all worked out for the guy (with the X valve)

maby he would care to post on the results, I'll send him a PM.

other than that, keep up the good work guys!

[rifleman wi]

..well that would be me.... ok.. i did actually use the bottom stop... yes it did take a lil tweeking.. i had it set short enough so that i could rip on the trigger allmost like an electric trigger.. it was amasingly fast... but i had problems with the gun not re cocking ( trigger rod didnt have enough room to reset, would stick) but i think they work great when adjusted right.. you just have to make sure the trigger rod has enough room to fully reset.. i can walk my gun pretty fast.. and i can still bounce it fast also...but i dont have any numbers for either of those... i also had no short stroking problems either... but i really like the stops.... any other questions just pm me.. -Jeremy