foregrip on a rt/pro custom question

[Hooter42]

Does the foregrip on the rt/pro custom come apart to accept a regulator? just wanting to know before i go cranking on the thing and break it.

[TransMan]

nope and there isn't a need for one since the valve has its own reg

[Hooter42]

true however

I have an preset airtank at 850 and the manual for the rt says that the best input pressure to run is around 700 therefore i thought a second reg would be needed.

[athomas]

IT should read "at least 700psi". Mags work better at high pressure. The higher pressrue helps recharge rate. The mag valve has a built in regulator so all you really need is a preset tank that has a high output. Your 850psi output is perfect.

[Z-man]

No second reg! Bad BAD! The valve is rated for up to 3000psi direct input and you will find that in fact the RT valve is happier with higher pressures. But again to restate the above, a second reg will only hinder the recharge rate of the valve and is not something you want to spend money on.

[misenhei]

in answer to your question, though, yes it does unthread...but like all the posts say, don't starve her with a 2nd reg.

[Hooter42]

question answered

Thanks guys for the input on the second reg. and thanks to misenhei for answering the question about the foregrip.