no engageing on classic valve!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • phelix
    Registered User
    • Oct 2004
    • 410
    #1

    no engageing on classic valve!

    Ok i have a classic setup on co2 with aci expansion chamber. That being said and done, plugging gas into the gun has no effect. The sear doesnt push down and engage the trigger. I can hear it gassing up, but to no avail. My powertube has a funny spring for a spacer. Do you guys have any suggestions? (Airline is clear, i just tested it by running water thru it)
    AO Feedback
    PBN Feedback
    Ebay feedback

    Airsoft and Paintball stuff for sale/trade
    Tags: None
    • Dayspring
      aka- The Day Wang

      • May 2001
      • 9664
      #2
      Turn up your velocity.

      Is your tank full?

        Comment

        • phelix
          Registered User
          • Oct 2004
          • 410
          #3
          velocity is on highest possible to the point of safety venting, tank is screwed in and full
          AO Feedback
          PBN Feedback
          Ebay feedback

          Airsoft and Paintball stuff for sale/trade

            Comment

            • bertmcmahan
              Not pop, it's all Coke
              • Jan 2002
              • 1960
              #4
              Try jiggling the bolt with a stick squeegee or pencil or something, it could be jammed in there funny. Make sure the on/off is moving smoothly and all, and maybe lube it up some. I assume this is a new setup, so it might just need working a little. Lube it up and make sure everything is moving freely and all. Oh and make sure your sear pin is in. Yes I have done that before, yes it is stupid.
              AIM-bertmcmahan
              My email:[email protected]
              My feedback thread
              Good traders: richie,Roguefactor,moufo48,845,brtncstm160,vf-xx

              Mags don't shoot darts... they shoot nails.
              I used to be bertmcmahan, that I did.

                Comment

                • phelix
                  Registered User
                  • Oct 2004
                  • 410
                  #5
                  yeah i guess it just didnt like the dryness in the on/off zone....or the teflon in the reg
                  AO Feedback
                  PBN Feedback
                  Ebay feedback

                  Airsoft and Paintball stuff for sale/trade

                    Comment

                    • evo.end3R
                      Mid/Front::PMI/RPS Factory
                      • Aug 2004
                      • 1196
                      #6
                      this is happening on me and my friends emags also we have xvalves...and i jsut got my gun back form tuna and its still not fixed
                      Ender's Violent/Hybrid Alias: 14" Stiffi, Frenzy116, Critical Trigger, VPp Torp HPR, Hybrid LPR w/ VPp, hybrid ARC

                      STOP PLAYING WITH MY SIG ITS NOT TOO BIG

                      :ninja:

                        Comment

                        • phelix
                          Registered User
                          • Oct 2004
                          • 410
                          #7
                          what the crap? i guess my problem isnt solved. The sear engages now, but when i pull the trigger it pushes the trigger rod in but doesnt fire. I dont think trigger rod length is a problem because i have actually lengthened it by a fraction of an 8th of an inch. What the crap is going on? The gun recently took a dive in a puddle. Could it be feeding water from the xchamber into the gun? Would that cause this problem?
                          AO Feedback
                          PBN Feedback
                          Ebay feedback

                          Airsoft and Paintball stuff for sale/trade

                            Comment

                            • athomas
                              Of course it works-its AGD
                              • Jan 2002
                              • 8039
                              #8
                              Take the valve apart and give it a good cleaning first, especially if it took a bath in a puddle.

                              The bolt could be sticking if the powertube spring is too short due to compression over time. Replace the powertube spring or get a powertube spacer kit, or better yet, get a level 10 kit for your gun.
                              Except for the Automag in front, its usually the man behind the equipment that counts.

                                Comment

                                • xen_100
                                  super-uber spyder tech
                                  • Oct 2002
                                  • 1203
                                  #9
                                  that sounds like bolt stick to me. do as athomas suggested. take it all apart, clean and lube the powertube area and the on-off area. as he said, it the powertube spring is wornout, it can cause problems. also, using co2 on it. the powertube o-ring might jsut be permanenty swollen. the extra friction could cause what you are seeing.

                                  "super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
                                  Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
                                  Xen's paintball pages

                                    Comment

                                    Previous template Next
                                    Working...