Will this work?

[feildsweeper13]

I went and bought a radio shack wall charger for my emag but I got a 1000mA power adapter instead of the 1500 on accident. Will it still work?

[RazorMonkey]

I went and bought a radio shack wall charger for my emag but I got a 1000mA power adapter instead of the 1500 on accident. Will it still work?

Yes, but you won't get a full charge...

[feildsweeper13]

Yes, but you won't get a full charge...

Do you know why? The charger says that the mA on the battery has to be lower than the charger. I thought that it may just take longer to charge but I dont know electricity

[monkeyking]

Actually, it'll work, but it'll take half again as long as the 1500.

What's the mAH on the battery? It's probably something like 1200 MaH, so a 1000 mA charger will take 1.2 hours, or an hour and twelve minutes to charge. Of course, all of these numbers are actually approximate.

[feildsweeper13]

mAh is 650 on the battery and the mA is on the charger is 1000. Does it make a difference that it says mA and not mAh?

[No Excuse]

Yes

Mah is a measure of current capacity. Ma is a measure of current.

I posted a DIY emag charger circuit on this forum that can be made for about $12.

[feildsweeper13]

Do you have a link?