Emag shooting about 1BPS on electric mode Help please

[agdfighter]

Ok I've been running a mech mag for about 4 years and I know all about them. But I resently bought an Emag (the dream gun) It works great on manual and hybrid mode but on electric mode the firing is about 1 bps. thats dry firing and paint.

I don't know electrics. It just won't shoot everytime I pull the trigger. Reading some other threads I wonder if its my huge drop or some sort of blockage to the valve. But then I don't think the other modes would work.(and they work beautifully)
I've read everything I thought would help but nothing has yet. In the end I haven't a clue.

Yes I bought it used but it was worth it, she is a beautiful gun and is in exellent condition. I just want to bring it to its full potential.
It has 2.1 software (plan on upgrading but I just got it), a tuna pack, dallara body, X-valve, and 6in psycho drop.
I'll post pics if that will help. even make a video if that would help.

[Arstron]

On your trigger, at the center hump, try screwing the allan screw in a little, I am thinking that maybe the magnent is just a little to far away to come in contact with the HES sensor.

[wanna-b-ballin']

is the battery charged?

[agdfighter]

Battery is full,

The magnet is very close, and I have a full tank of air.
I can try screwing the magnet in more but I already did that.

[Sumthinwicked]

bps set to one on the board???

[agdfighter]

No I've put it on every level but no go.

[Sumthinwicked]

No I've put it on every level but no go.

to be honest i just got mine i have found that mine shoots the same in e verse mech minus the lighter pull soo ????? try cleaning the magnet might have something to do with it if only tuna_man saw this thread pm him

[agdfighter]

Yeah I'm after the lighter pull (why I got it)
And I might go after tuna_man but was wondering if there was something I was just plain doing wrong.

[Arstron]

I didnt even think of this, push the top button on the back of the trigger frame until it says TRG OFF, pull the trigger and see if it switches to TRG ON every time. If it does then their is somthing wrong with the solenoid (perhaps the plunger needs adjustment?). If it doesnt switch to TRG ON everytime either the problem is either the HES sensor, or the trigger needs adjustment.

[Sumthinwicked]

since ur here ast check pm :P

[agdfighter]

I didnt even think of this, push the top button on the back of the trigger frame until it says TRG OFF, pull the trigger and see if it switches to TRG ON every time. If it does then their is somthing wrong with the solenoid (perhaps the plunger needs adjustment?). If it doesnt switch to TRG ON everytime either the problem is either the HES sensor, or the trigger needs adjustment.

I'm trying that now but just found out my battery is down. It shouldn't be dead yet I don't think. Would a bad battery let it work on hybrid but not have enough juice for electric.

[Sumthinwicked]

recharge and depends how low it really is might fix ur issue ? hopefully

[agdfighter]

recharge and depends how low it really is might fix ur issue ? hopefully

I stuck it on the charger for about 5 hours as soon as I got it. It showed green so I stuck it on the gun but it didn't work.

[agdfighter]

Astron I don't think I've seen anything like TRG ON or TRG OFF I don't remember that anywhere.

[11 Bravo]

It may not be on that older version of the software. It would be good to have at the moment. Try backing the magnet off a little, maybe its too close.