Minimag upgrade question..

[ABTOCMEPTb]

I got minimag with w/ 4 star minimag valve. It comes w/ level 7 bolt. Is it possible to upgrade it to x-valve and lvl 10?

Thanlk you

[topazpaintball]

Yep, minis can take X's and LX

[Dayspring]

Basically, take the valve you have out, put the Xvalve in. Done.

[ABTOCMEPTb]

what about ule trigger?

[REDRT]

what about ule trigger?

If you do get the X valve then the ule trigger pull kit will work nicely. The "ULT" for short is just a replacement on/off assy in place of the standard on/off. It isn't recommended for your minimag valve, but works well with the X valve.

[ABTOCMEPTb]

Thank you very much.

Does anybody knows if AGD does this upgrades or I better off asking Tuna to do it?

[REDRT]

Thank you very much.

Does anybody knows if AGD does this upgrades or I better off asking Tuna to do it?

What the ULT or the whole X valve set up? Either AGD or Tuna can do the tuning/setting up for you, if you wish. You learn more if you do it yourself and it isn't that hard.

[ABTOCMEPTb]

here is minimag I would like to upgrade

[REDRT]

here is minimag I would like to upgrade

I love it!! BLING BLING!!! What brand of grip frame is that?

[ABTOCMEPTb]

no idea.
I dont even have it yet. Its gonna be shipped tomorrow

[afortuna]

no idea.
I dont even have it yet. Its gonna be shipped tomorrow

I had a similar set-up and actually bought my X-valve with lvl X and ULT from a guy here on the board. It's an easy install. Hardest part is reading all of the threads so you know what you are doing, but it really isn't all that difficult to do. Best upgrade you could possibly do. My gun was so quiet and for whatever reason had a long range.

[REDRT]

no idea.
I dont even have it yet. Its gonna be shipped tomorrow

That frame is sweet. Let me know when you get it what it is. I might have to look for one for mine.

[blinky1041]

it's a dye trigger frame

http://www.pbreview.com/products/reviews/2692/

[Walrus]

it's a dye trigger frame

http://www.pbreview.com/products/reviews/2692/

Exactly the same as a DYE, but this was marketed by 32 Degrees. Same, just a different logo stamped on it.

**I would post a picture of my Pump Mini (which looks similar), but I can't find a good clear picture right now.

EDIT: I forgot to address your question. As everyone else has stated, you can just drop in the X Valve and lvl10 if they come pre-tuned. There will be some fine tuning, but that will be easy to do. Also, as stated earlier, you can drop in a ULT if you want a lighter trigger. It is made to replace the entire on/off assm. in a X Valve, but with patience and the right stuff you can put on in a Minimag valve. It is still a drop in, but you will need some extra shims to fine tune it. Honestly, so many people are so into upgrading to the latest greatest thing, that they never try the stock setup. No offense, but you don't even have it yet and you want to upgrade it. Try it out first, then start your upgrades. Also, see if you can find someone with a X Valve and ULT on thier setup so you can try out their gun before you go spending a bunch of money and possibly deciding you don't like it. Good luck and I hope you like it!!

[ABTOCMEPTb]

the only reason why I am planning upgrade is cause owners admitted that marker chops when he tries to shoot fast