My 3 year old gun, looking for new upgrades

[gotboostedvr6]

thats her pic i havent been playing for a long time im looking for small helpful mods i can do that will increase my "fun" during a game

mods are as follows
Xvalve
agd trigger frame
black ice uni reg by air america
dye stainless 12"
VL 12v or 18 v not sure
everything else is obvious

lmk what you think

[TheAngryDrunkenRussian]

I'd get rid of that extra reg and go with a CP foregrip and look at doing a Pneumatic trigger do on her.

[Tool-of-death]

thats her pic i havent been playing for a long time im looking for small helpful mods i can do that will increase my "fun" during a game

mods are as follows
Xvalve
agd trigger frame
black ice uni reg by air america
dye stainless 12"
VL 12v or 18 v not sure
everything else is obvious

lmk what you think

it's a 12V cus to my knolage they never made an 18v

Don't need the reg, go with a Deadly wind carbon fiber grip. they are nice and light too

http://www.deadlywind.com/store/mag_cf_foregrips/index.html

A ULE body for sure.
(I hope you know where you can get one)

A Deadly wind wisper barrel (great barrel)

http://www.deadlywind.com/store/wisper/index.html

Shrink wraped hose

http://www.themagesmith.com/

and a diffrent trigger and grips for your intelli (dye stickie 3's are awsome)

http://www.themagssmith.com/

Thats what I would do..... but thats me not you.

[gotboostedvr6]

awsome thanks for the good replys

this forum seems to be a friendly one so i think ill stick around


keep the ideas coming!

[gotboostedvr6]

for some reason im only getting 450 psi from my tank i think my tank reg is bad

what would be a good replacement larger tank for me to get ill do screw in or non screw in style

[gotboostedvr6]

whats a ULE ? sorry for the noobness but ill learn quick.

[Tool-of-death]

for some reason im only getting 450 psi from my tank i think my tank reg is bad

what would be a good replacement larger tank for me to get ill do screw in or non screw in style

guerrilla regs are nice regs

http://guerrillaair1.chainreactionweb.com/store/product_info.php?cPath=23&products_id=128&osCsid=7e0cbd202907663988383c147d71749c

Ultra Light Engenering
It's AGD light weight body, it takes angel feednecks and detents, and autococker threaded barrels

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=337&categoryID=10

[gotboostedvr6]

wouldn't a power feed pull balls faster?

[hs2000]

^if you want to feed balls faster, get a faster hopper.

If that was mine, I'd pull off the reg and huge drop forward, and put on a ULE body and a single trigger.

[gotboostedvr6]

bump

[mclaggan123]

they called them 18v cause they take 2 9v batteries. but yes its a 12v.

[2BAD4U]

Oil Change ......

Buy an O-ring Kit & replace all of the O-rings in the gun. Lubricate your marker once a week 4-fewest problems. to properly lube your 68AutoMag /MiniMag, drip 4-6 drops of Autolube in 2-the air inlet closest 2-the valve. Then gas up & dry fire your marker several dozen times with the barrel removed(2 prevent oil buil-up in the barrel) ......

[Ir0nExpress]

Warp Feed!

[FlawleZ]

it's a 12V cus to my knolage they never made an 18v

Yes, they did.

[pump]

if you can ULT an Xvalve i would...but i dont know for sure

man thats a nice mag...yeah the reg should go