i need help with intelliefeeding stock grip

[BEEFYSAUSAGE]

please i have made a boo boo and need to intelliefeed my stock grip frame (plastic fiberglass thingie one, its very late here and i need sleep....ok pictures would be really good here as i just need help placing the micro switch(position)please no intelliefeed grip pictures(AGD made ones)only converted stock frames..PLEASE PLEASE PLEASE HELP ME i have a tourney in about 7 days (working 5 of em)
MUCH thanks in advance!!!
BEEFY.

[BEEFYSAUSAGE]

up

up

[Cha0tic]

well, there have been no conversions like this before, at least to my knowledge. i will try to do it this weekend though. i will e-mail you or pm you if i do it.

[BEEFYSAUSAGE]

thanks

you t man chaoitc, i know how but theres not alot of room in there to mount a microswitch...i`m just starting to panic before this tourney (havent played for a year,tourneys anyway.)but any help is mutch appricated
BEEFY.

[personman]

I have already asked millions of people(well not millions) and they say get a dremel.. of corse I just gave up hope.

[BEEFYSAUSAGE]

ok

i wish i owned a dremel and a good vice then there would be no prob....but at the moment i can use a file(if ya go slow its harder to fudge up)to make some room but i hope chaotic
can help ,just where i should mount it........

[BEEFYSAUSAGE]

ok

i wish i owned a dremel and a good vice then there would be no prob....but at the moment i can use a file(if ya go slow its harder to fudge up)to make some room but i hope chaotic
can help ,just where i should mount it........

[personman]

you should mount it where the roller hits the sear when the sear is back

[Otis]

alright i have done it.. it's not the best but it works good.

i bought the same micro switch shwn in the regular instruction tom posted up
then i got out my dremil and started hacking. i made proper cuts too make it the switch fit.
i cut a peice of abotu 1/8 thick black plastic so it would fit in the one side of triangular whole.
i set the micro switch in .. in the proper position so it will work when trigger is pulled. marked the 2 spot where the screws or bolts come threw. then drilled the wholes..
i fixed the piece of plastic in with hot glue very neatly and carefully to be sure it wouldn't interfer with sear movement or the switch.
then i cut a spot in the top to run the wire threw
i soldered the wires on my switch and glue the wire in the slot i cut in the top..

i don't have my digital camera back until next wednesday. but when i get it back i will have some more pics for u if u need. heres one i took before though.

i hope this helps ya out.. any questions please ask..

[BEEFYSAUSAGE]

THANK YOU THANK YOU THANK YOU

THANK YOU ...that was all i needed, thank you to everyone that helped on this one i feel sooo relaxed now...
BEEFY.

[personman]

Ahh Otis tempted me. I did it. Just need to wire up and bolt on!

[personman]

again.. the last one was blurry cause I wasnt using the tripod.

[BEEFYSAUSAGE]

ok

looks good guys you have been great(as usual)ill have mine done soon (got 2 days off now ) )all i can say is another AO problem solved!!!!
BEEFY.

[personman]

WHOOP! COMPLEATE! It makes me warm and fuzzy inside..
BEEFY, WARNING TO YOU! If you havent started yet, WATCH OUT WHEN YOU ARE TAPPING INTO THE RED WIRE IN THE REVY!!!!
The insulation is pretty thick, and I accidentally CUT the wire in two. Its a real pain in the butt if you dont have a soldering iron, but luckally, I do!
DO NOT cut the red wire, and good luck!
Pics!

[personman]

again