Well, since you have tried almost everything else have you checked the lengths of the solenoid plunger and the trigger rod? It is possible that the plunger length is off and could be causing this issue. You will have to get a caliper to do the measuring so you can make sure it is exact. The reason why your gun will work upside down with no air is because gravity is allowing the sear to reset which is typically the job of the on/off. E-Mags are different than most other E guns because of the way of how the solenoid works. It depends on the on/off to reset the sear, not reverse polarity. I am not sure if the heat is common or not, becuase I am usually running around playing when I use my Mags so I am aways warm and sweaty.
The lengths I asked about previously are mention in the sticky at the top of this section. It will be listed in inches, so you may need to convert it to millimeters. Sorry you are having trouble, but usually once you get it set and working you never have to worry about it again.
The lengths I asked about previously are mention in the sticky at the top of this section. It will be listed in inches, so you may need to convert it to millimeters. Sorry you are having trouble, but usually once you get it set and working you never have to worry about it again.
Comment