gun is is farting a lot

[GallagherAtWar]

if i pull my trigger slow its ok but if i speed up to like 3-5 bps then it farts

[MAGS own YOU]

your probly short stroking it.

[GallagherAtWar]

i dont think so because i can shoot 2 times as fast with my brothers gun and have no shoot down

[kenshinkandon]

Try Beano that helps me out

Your gun farting has no effect on shootdown.
Shootdown is what happenes when your are firing a long string shots and you gun cannot recharge fast enough to keep up with your rate of fire, this leads to inconsistency in your velocity.

Do you have enough air or CO2 are you chopping when this happens?

[Drizit]

i'd start with a bit of oil in the ASA. if that doesn't help then try the same tank your borthers mag is using. next remove any secondary regs, if none of that works run a parts kit through the gun, replace any seals that have gotten hard, also do the reg seat. if none of that works check back with us.

however you should do it in the tech forum.

[hitmanng]

3 drops of beano in the ASA and shot it about 100 times.
That out to clear it out. If not try a dulcolax supository down the barrel... My only other thought is a retention enema and I really don't want to go there.
Sorry
Hitmanng
I always wanted to grow up and be a midget in the circus....then I grew up.

[GallagherAtWar]

first what part of the asa do i put a beano? and whats a beano?

Also i already replaced all of the things and then i t did this and why doesnt a piston oring come in a parts kit? and were can i get 1?


Chris

[IceCool32]

Beano is a "gas" stopping pill. Taken correctly, it prevents passing gas. It's not for paintball markers.

Take a drop of GOLD CUP oil, drop it in the ASA, shoot a few times, report back.

[MagMan5446]

Originally posted by IceCool32
Beano is a "gas" stopping pill. Taken correctly, it prevents passing gas. It's not for paintball markers.

Don't tell me you thought he wasn't joking....

[Drizit]

a piston o-ring??? do mean power tube o-ring? if so there is one in the parts kit. if you mean reg piston, then there is one of those to, however it's a pain to get on, you will need a pick to do it.

[beam]

HAHAHA you guys are cruel...stop with the beano jokes. LOL

BTW I had a friend get very very sick after taking beano....guess you gotta just let nature take its course!!

[GallagherAtWar]

can i use piranha oil?

[Drizit]

probably, i don't know for sure but if it's paintball or air tool oil you should be ok. just don't use shocker or matrix grease. you want oil. (also don't ever use "gun oil" for real guns, it has solvents that will eat all the seals on you marker.)

[GallagherAtWar]

so i drop 1 drop in to the asa and fire?

[GallagherAtWar]

the oil didnt work nor did my brothers tank

when i fire it's like a nice strong shot if i do 1 bps and but like 3 its like a tss sound doesnt feel like its doing somting right

it might not be farting but i think it is

i had just replace the orings when this happened before i dont think any thing was wrong but after that is when it happend

i replace the powertube oring, the teflan orings in the onoff valve, the other oring in the on/off valve and the thats it i might have accucdently put a oring with a little nic in it on the side in the on/off thing

any 1 have any ideas?