gun is is farting a lot

[Paintchucker]

Get it all parts kit upgraded right?

not sure if you had a reg valve or the retro valve. If you have the retro, you can find the exploded view on the Airgun Online website in the parts section.

Not quite sure what the problem is, but make sure you got all the orings, etc. in the correct place and if you have a nic in an oring, replace that for sure, even if you have to put the old one back in it. And when I oil it, I typically put one drop of oil between the bolt and power tube and 2-3 drops in the asa or quick disconnect.

[2UnREal]

I think your gun is farting because the bolt spring is compressed. Try getting a new one. That is what happened to me.

[Drizit]

make sure your velosity is up, replace your reg seat, make sure the reg pin isn't jamed and the spring attached to it is ok. the top of the wide part on the reg pin should be around flush with the hole in the center of the front half of the valve (if i remember corectly.) also check your power tube spacer, if you changed the o-ring it's posible that you may need a different size.