Spydermag question

[FallibleFlyer]

Ive been looking into doing a spydermag conversion and I have a few questions.

1. I have two valves, a Field Rental (modified to accept lvl 10) and a retro valve. Which would work better? and why specifically.

2. I have noticed that there are two main methods for doing this mod, one of them is to rotate the noid in the frame. How do you do this? Anyone know of a good tutorial? I have access to a mill but Im unsure exactly how to do it.

3. What's the best frame & board to use?

4. Although I would like to do this myself, is there anyone out there that does these mods for a certain fee?

EDIT: I will be using a classic AM rail.

[riceboi]

http://www.automags.org/forums/showthread.php?t=143273

http://www.automags.org/forums/showthread.php?t=155286

http://www.pbnation.com/showthread.php?s=&threadid=696650&highlight=%2Bspydermag

http://www.paintballforum.com/air-gun-designs-agd/119668-spydermag-finally-ready.html

http://pbunderworld.com/showthread.php?t=2196

that some i fine one google

[FallibleFlyer]

Thank you. I had found most of those thread before. The one pertaining to the reversed solenoid has a slight problem in that the pictures are terribly blurry. Has anyone done this mod before and can take nicer photos? or know of some on the web already that aren't so blurry.

[warbeak2099]

You NEED (and I can't stress this enough) a ULT in order for it to work. A pancake noid cannot overcome the stock on/off. Whatever valve you use must be ULT compatible. Btw, I am thinking of selling my Spydermag frame that Luke did for me. If you're interested, PM me.

[FallibleFlyer]

AGD's site says you can get the trigger pull kit to fit a modified retro valve. How?

[Madmarx]

AGD's site says you can get the trigger pull kit to fit a modified retro valve. How?

It has to be machined out first

[FallibleFlyer]

Do you know what diameter it needs to be drilled out too?

[riceboi]

have any one try make a spydermag out of micromag body?