Originally posted by Bad_Dog
-
Here you go: LiNk -
just so you know, stock class rules allow for up to 15 rounds when mounted horizontaly ontop of the gun. so you didnt have to make it exactly 10 balls"You have not converted a man because you have silenced him." -John Morley
Comment
-
awesome...Originally posted by HoppysMag
I can just pop a regular PF plug in the front and it should hold ~13 balls I believeComment
-
-
-
-
-
Is it operational? How many shots do you get per 12gram? What kind of barrel are you going to use?Comment
-
it is operational... I'm not very familiar with the pump kit yet but I did have to remake the pump rod to spec... I havent yet tried it with the new rod.
When I did try it before it leaked a little down the barrel after each shot... but in semi (without the pump kit installed) I was getting 17 good shots, 2 "ok" shots and a "fall out the barrel" shot...
The loading cap on the end of the tube is home made... Its a warp hose adapter that I cut a slot in, and a small piece of milk jug plastic has been glued in the slot... the milk jug plastic is flexable yet retains enough elasticity to return to its origional position when the 10 rounder is removed or the balls go through.
The CO2 quick change adapter I recently purchased here on AO and its pretty darn nice. It matches the overall tubular appearance of the marker and is easy to use. I hard mounted it via ASA to the side of the valve with a solid brass "double male" air fitting...
The barrel I'm probably going to cut down is a stock crownpoint... I think I'm going to go for the same length as the pump handle, if not like 1/2 inch longer... what are your opinions on that?
I played with it today without the pump kit installed... and had a blast. Playing hyperball with it is hella fun even if I was most of the time on the recieving end of the paintballs.
If anyone has any ideas to solve the pump-kit powertube leakage problem that I'm encountering after each shot... lemme know, I'm eager to get this thing roaring onto the field!Comment
-
the air leak
Have you been able to stop the flow of air down the barrel? If so, how? I am still having this problem with mine. Also, make sure you make the barrel longer than the pump. Getting shot in the finger point blank is BAD
., And it is hard to explain to friends.
Last edited by maglover728; 11-05-2004, 02:46 PM.stay proud, Stay mechanical!
And my feed back is at: http://www.automags.org/forums/showthread.php?p=1771790#post1771790Comment
-
Very Nice!Comment
-
I've been following this thread for a while and I gotta say, Sweet setup...
I hope you get the pump problem fixed...
Comment
-
im so proud! thats my pump kit on there!!!"You have not converted a man because you have silenced him." -John Morley
Comment
-
Nice setup
Did you try shorter PT spacers to stop the leak?
Comment
-
Ditto on the power tube spacers...should fix the leak...... on a side note... I broke my pump rod yesterday.....not happy about that....
Comment
Comment