stock class minimag body

[Big'n slo]

Ditto on the power tube spacers...should fix the leak...... on a side note... I broke my pump rod yesterday.....not happy about that....

Wha wha What!?

[Bad_Dog]

I just fixed the leak down the barrel...

Instead of having a powertube spacer... my mag has the spring. I just swaped the location of the powertube oring and spring... letting the spring go in first, then the oring...

yeay! now it is fully functional

I only wish I had the $$$ for that 6-pak for sale in misc forums

[msm0711]

Wha wha What!?

Don't worry, I ordered 2 more and when they get here and my new trigger frame gets here...I'll have 2 completed pump mags....lol. Though one's off to be PCed tomorrow...oops, sorry for the thread intrusion.

I see you have a duckbill for attaching the 12g changer. ACI makes a piece that just has the 1/8" port and the bottle threads, I'm getting one sent to me for a similar project...when It gets here I'll send a pic...or you can see one at thier site, it's used on thier remotes. Works the same but will cut down the "duck bill" on the end of the gun. By the way...awesoime marker!

[Bad_Dog]

I see you have a duckbill for attaching the 12g changer. ACI makes a piece that just has the 1/8" port and the bottle threads, I'm getting one sent to me for a similar project...when It gets here I'll send a pic...or you can see one at thier site, it's used on thier remotes. Works the same but will cut down the "duck bill" on the end of the gun. By the way...awesoime marker!

yeah I was thinking of cutting that off... wouldnt be difficult I have all the tools to make it look nice but I just didnt want to have the duckbill be multicolored (raw & black)...

maby I will though... kinda curious how it'll look...

[msm0711]

Another thought could be a Mag vert asa, for attaching the foregrip to the rail....might look nice on the side there....

[Konigballer]

Bad Dog, that thing is figgidy sweeeet.

with a short t-stock and stubby barrel, that thing would be assassin sweet

[luke]

Nice!

What does the cocking rod attach to?

[Gazoo]

I like the look of it! You have done some nice work. You should bring that to BFG paintball on the 20th for a pump only day we are having there so I can see it first hand.

Next you may want to make a spring feed for the loader, would loose the ball gate though.

Was wondering why you didnt just drill and tap for a phantom black or clear feed block and then to either a 10 or 15 round loader tube with ball gate instead of welding the tube on?

I have that set up on mine, as well as haveing the feed hole threaded so I can throw an angel/illusion vert feed on it.

So in stockclass mode, I can either have the feed tube in "Sheridan" mode, facing front, or "Nelson" mode, facing back, depending on your style of "rock-and-cock"

Mine is also the slug body, if that makes any difference. I have seen other right/left feed bodies with the power feed knocked off and the feed block put in its place. Makes for a cheap and easy conversion.

Just thought others should know.

This pump mag was my first, and I may never look back. It still has the classic valve in it and shoots excellant.

[BeaverEater]

Its a great gun and he almost shot me twice with it. But i did see hit shoot a lot of people with it last time we played.

[Gazoo]

I was also going to mention that on have blues site, he has all the docs on how to do the conversion from semi to pump. Also, he mentioned that you remove the spring from the power tube and replace it with a spacer. the only springs in mine are the 2, the one on the bolt and the one behind it for the pump kit.

Hey Beaver, you coming to BFG on the 20th? Should be a good time, pumps only from 1 to 4 ish. Post on Stockclass if your going.