Can I build my own Devilmag?

[Resurection]

Well after looking at my options I am going to need go with a sear tripper type selenoid. I know they waste more electricity, but with a rechargeable 9 volt Nimh battery that could be fixed. BTW I changed my mind about the whole Devilmag idea. This is going to be an upgrade for my Emag. I will attempt to install predator board and eyes.

Not sure if that would work or not, check with Big Evil - he had spearheaded a TAG board specifically for the existing Emag hardware that hasn't moved along too well either. But if you are looking at changing the hardware on the emag and using a Predator, I think there were other 'issues' with that idea. Just giving you a heads up.

[RavishingEddie]

Not sure if that would work or not, check with Big Evil - he had spearheaded a TAG board specifically for the existing Emag hardware that hasn't moved along too well either. But if you are looking at changing the hardware on the emag and using a Predator, I think there were other 'issues' with that idea. Just giving you a heads up.

Yes, I plan to change the whole hardware. Doing so I would have use a lower voltage source.
For the sake of space and weight reduction I plan to place the smaller rechargeable battery inside the Emag battery case were the standard battery went. I would just have to run the wire all the way through the frame and out the hole were the battery screw connecter used to be and surround it with foam. That is the way I plan to solve that problem only 3 more problems to go and you will see something that will blow your mind.

[warbeak2099]

No 9v is going to be able to run the emag noid, you know that right? If you want to run a 9v, you're going to have to:

Get a Hyperframe/Spyder style noid
Mill the frame so the new noid fits up in front of the sear arm
Get a regular RTP sear

[RavishingEddie]

No 9v is going to be able to run the emag noid, you know that right? If you want to run a 9v, you're going to have to:

Get a Hyperframe/Spyder style noid
Mill the frame so the new noid fits up in front of the sear arm
Get a regular RTP sear

Yes I plan to use a different noid, but I plan to make changes to the sear, but if that fails I will go plan B and drill a tiny pin hole through the hyperframe/spyder noid. What makes my idea harder is the fact that I wanna still maintain the E/M switch of the Emag. I will post pic drawings of my idea.

[Rudz]

xmod

if speed is what you want, xmod software is the name..speeds of 24 and 26 bps have been reached depending on tank otput..i love my emodded emag..big evil is alos on the xmod beta testeing squad, along with alot of other members..just a heads up..for free software and a hundred dollar programer..cant be beat..i think big evils also doing flashes for a small fee, so u dont have to buy a programmer..

[RavishingEddie]

if speed is what you want, xmod software is the name..speeds of 24 and 26 bps have been reached depending on tank otput..i love my emodded emag..big evil is alos on the xmod beta testeing squad, along with alot of other members..just a heads up..for free software and a hundred dollar programer..cant be beat..i think big evils also doing flashes for a small fee, so u dont have to buy a programmer..

I like the Xmod software and I just bought the programmer and will install it on one of my guns this weekend. That is one of the things that is keeping my hopes high on competiting tournament level, using a mag.

What I am trying to do here is take a different route and try to get a couple things that I might not get with the Xmod. One is the ability to use eyes, and the other is to reduce weight on the gun by replacing the heavy battery and be able to mill away some of the insides of the frame.

[RavishingEddie]

[QUOTE=RavishingEddie]I like the Xmod software and I just bought the programmer and will install it on one of my guns this weekend. That is one of the things that is keeping my hopes high on competiting tournament level, using a mag.

What I am trying to do here is take a different route and try to get a couple things that I might not get with the Xmod. One is the ability to use eyes, and the other is to reduce weight on the gun by replacing the heavy battery and be able to mill away some of the insides of the frame.[/QUOTE/]

What type of solenoid should I choose if I want one just like the Hyperframe/Spyderframe mag?

What is the Duty cycle and AWG number . Thank You