eblade mag

[captian pinky]

ok so i was thinking of that mag with the eblade on it and well i came up with an idea

1
could the frame be modded just liek a spydermag frame and function using that solenoid

or
2
could the cocking solinoid be taken out and the 3way moid be used with a ram like in the puematic frames


setup 1 the eblade frame with the modded noid inside and no other noidor hoses
setup 2 the eblade frame with the 3way noid and no cocking noid and a ram replacing where the cocking noid would be



just some ideas i came up with it would be nice to see what might happen

[luke]

I think I can do it, but I haven't been able to get my hands on an Eblade to check it out.

[captian pinky]

cool well i havent been able to get mine hands on a zgrip to check it out but i geuss we are both working on that haha

[BigEvil]

I heard PE is going to discontinue the Eblade, so they may become scarce.

[luke]

cool well i havent been able to get mine hands on a zgrip to check it out but i geuss we are both working on that haha

Strange response, did you did you not ask if it could be converted.

Let me be more direct:

1 could the frame be modded just liek a spydermag frame and function using that solenoid

No. The 'noid can't be moved from it's current location.

I do believe it can be moded the way I do the Mokal frames. (Not a Spyeder mod)

2
could the cocking solinoid be taken out and the 3way moid be used with a ram like in the puematic frames


setup 1 the eblade frame with the modded noid inside and no other noidor hoses
setup 2 the eblade frame with the 3way noid and no cocking noid and a ram replacing where the cocking noid would be

None of this matters if you can't engage the Mag sear.

[captian pinky]

the ram would be set up just like it would be in the pmag frames only setup with a the noid from the cocker

[warbeak2099]

If you could mount a ram inside then yea, you could use the SMC 5-way instead of the pancake noid. You'd need an lpr too.

[captian pinky]

ya you understand iwas saying just take the cocking noid(pancake noid) out and put a ram in its place to push the sear and then have it run just liek a cocker with lpr hose to noid and to ram

[warbeak2099]

The pneumatic nod is the cocking noid actually. But yea other than that you are correct. It would basically be CoolHands UEM frame in an Eblade frame.

[kingpen509]

Like this:



Thread is here, its toward the bottom:

http://www.pbnation.com/showthread.php?t=1296871

[luke]

Like this:



Thread is here, its toward the bottom:

http://www.pbnation.com/showthread.php?t=1296871

If I remember correctly, the only thing "Mag" on that marker is the body. It dosen't use a Mag valve or sear, as far as I know. Feel free to correct me if I'm wrong.

[rkjunior303]

PBX/Mel only used a "mag" because of it's single tubed body. It's an mQ-Valve.

[luke]

PBX/Mel only used a "mag" because of it's single tubed body. It's an mQ-Valve.

Yea that's what I was pointing out.
It can't be used as an example of how the Eblade can be converted for use on the Mag.

I'm still waiting for captain pinky to explain how he intends to relocate the Eblade components and engage the Mag sear to fire the marker.

I have a simple solution; I'm just curious how he intends to approach it... (?)

[captian pinky]

well if i can i was going to turn this into a electro pmag so basically the eblade board funtions normally and then operating the noid and pushing the aair to the ram just like a pmag only instead of the 3way and other hoses there is just regular setup of the eblade and then the hoses are run to the ram mounted in the frame above the board where you would expect it to be in a pmag conversion

please feel to comment mind you im only 15 and i have worked on many guns but minor custom work

[stonersr26]

Captain Pinky, that is one way of doing it, but Luke's method is much cheaper, more simple, and more reliable. I am pretty sure I am doing the same thing he is planning. After I get it finished I will post some pictures for people to see, I just don't know when that will be .