NEW PumpMag kits available (kind of)

[Rudz]

i dont think the rods and arms are much to machine, i mean we have some damn good machinists around, but making the handles, what would be used? delrin? i would love plastic handles like the agd ones, maybe in different styles, but dont know anyone who works with plastics

[pump]

well as long as the depth is correct then it should be ok, just if the ramp is too steep maybe there would be a problem

also i need to look into the pump rod...bend types and rod thicknesses


hummm this might be another fun project that i will never finish

[Smoothice]

"Break down, break down, break down" . Be sure to run it by Rainmann229 first to get his opinion first. Also cyberave has awesome machining skills and is another excellent choice.

Hey guys,

I have been putting a lot of thought into this and I think I have a pretty good idea for a pump kit. I'm fairly certain it would work great and look good. Of course this is all in my mind. I'm planning a trip to Home Depot to check on a few things. If there is honest interest and people would be willing to do a pre-order I think I could put this together.

All the kit will require to work is for 1 factory AGD product to be drilled and tapped. Besides that it will need a pump milled rail and body.

I don't want to give to much away until I have a working protype.

The kit will include stops for the pump handle in both directions. It will include a return spring. It will also have 0 visible holes (unlike the factory AGD Pumps).

The pump handle will come in many different colors at $0 extra charge.

Let me know what you think.

[MisterBones25]

you know guys, i actual sent wevo an e-mail a while ago about a pump kit. they said they had one "on the radar". maby if you guys shoot them an e-mail, that might get the ball rolloing. just an idea.

[Spduca]

Papabyrd

This is Papabyrd's (AO Member) design of an XXXtremely Coooool AGD Pump Kit from a few years back ....... enjoy.
I have tried to contacted him with no luck.


Angel

[thejayare]

you know guys, i actual sent wevo an e-mail a while ago about a pump kit. they said they had one "on the radar". maby if you guys shoot them an e-mail, that might get the ball rolloing. just an idea.

There! I pm'ed his rep on SCP. We'll see what happens. When did you speak with them?

[MisterBones25]

There! I pm'ed his rep on SCP. We'll see what happens. When did you speak with them?

maby a month or two ago. i'v been trying to keep it quiet because we all know what a let down is when someone says they might produce a product for us but never do. it wouldnt take much r&d to moddify the phantom undercocking kit to a mag pump kit.

[thejayare]

it wouldnt take much r&d to moddify the phantom undercocking kit to a mag pump kit.

Probably not, but I do hope that if/when they do it, that it will be very close in design to the original AGD kit. Still waiting on a reply...

[RRfireblade]

Probably not, but I do hope that if/when they do it, that it will be very close in design to the original AGD kit. Still waiting on a reply...

I've got a Mag kit in proto stage already. I build the Wevo kit as just a phantom kit , I'm not going to redesign it for something else. Mag guys deserve thier own.


My new mag kit is very similar to the AGD kit only simplified and streamlined. And I will be offering rail milling to go with it as soon as I get time to finish it all up.

[thejayare]

I've got a Mag kit in proto stage already. I build the Wevo kit as just a phantom kit , I'm not going to redesign it for something else. Mag guys deserve thier own.


My new mag kit is very similar to the AGD kit only simplified and streamlined. And I will be offering rail milling to go with it as soon as I get time to finish it all up.

That is the most beautiful thing I have ever heard. I love you.

[Smoothice]

I've got a Mag kit in proto stage already. I build the Wevo kit as just a phantom kit , I'm not going to redesign it for something else. Mag guys deserve thier own.


My new mag kit is very similar to the AGD kit only simplified and streamlined. And I will be offering rail milling to go with it as soon as I get time to finish it all up.

Prices?

[zipity_Bop]

The pump rod isn't captured in the rail , so the handle will just shoot off after you pump.

it wouldn't be hard to solve this just the front of the rail would have to be milled smaller then the rest..... that way the bend in the rail will have no room to leave..... and the bold pushes the pump arm back into its whole it doesn't shoot it out of the gun

[RRfireblade]

Prices?

Just a guess would be somewhere in the $100-$150 range ballpark.

[Smoothice]

Just a guess would be somewhere in the $100-$150 range ballpark.

Can't wait to see a prototype. Is that with or without rail milling?

[RRfireblade]

IDK.

Rail milling isn't very costly either way.