how to get R/T or bounce effect for a

[PBChappy]

logic vert frame, x valve with stock on/off. key to getting nasty rt effect - ADG 4500 flatline with 1150-1200psi to the valve, i can out shoot my vlocity with this setup

[snoopay700]

MOST ,yep i sure did

I keep hearing that a ult isnt as good for Bounce as a none ult.
I did find that i have a ans venturi bolt. Doing a lil research on it peeps either like or hate it

Opinions ???

I had one, it broke balls pretty frequently, the level 10 is so much better, haven't broken paint with it once as i recall. The ans is just a bunch of hype.

[FOG]

PBCAPPY, thanks bud thats ABOUT the BEST advise ive had.

Snoopay thnks thats the ONLY response i got on that question

Im going to go w/x so im good ta go then

[phatty123]

Retro valve, RT pro Valve, emag valve, x valve, all will bounce with high imput pressure coming from the HPA tanks regulator. 900-1100 or so. The more pressure the more bounce. I ult with to many shims with runaway rapid fire, not really bounce.

-out

[BigEvil]

PBCAPPY, thanks bud thats ABOUT the BEST advise ive had.

Snoopay thnks thats the ONLY response i got on that question

Im going to go w/x so im good ta go then

Like I was trying to explain at MCB - You can also get a really good RT effect with less than 1000 psi if you use shorter on/off pins.


The problem with running insanely high input pressure into the gun, is that once the tank drops below that input number, you loose the RT. Plus, if you are running 1200 psi in, then you are loosing almost 1/3 of the useful capacity of the tank.

[punkncat]

I am getting a good RT effect from my ULT. I have found problems when using too many shims with the sear not resetting. It goes WAAAY fast and then stops shooting. I backed off just a touch and get a great effect around 9-1100 PSI. I am using a Centerflag 301 68/3000 that I picked up cheap and only had to hydro the tank. Too bad that it runs through air every round and cannot be usefully used outside a speedball environment. I have to turn it down to use for woodsball or I spend all my time walking for air.

By the way I use a double trigger and think its a required part of the equation.

[FOG]

Thanks evryone !

Anyone else have input on this ?????????

[Skiddz]

well i get very minimal bounce if i find the sweet spot on my tac-one and thats running at 850 pressure output. I think most of the bounce comes from the output tank pressure your using.