Appraisal Wanted...

[DevilMan]

I know I know.. it's worth whatever someone will pay. There seems to be some conflict here as what's worth what... I think it higher others think it lower. I'm really a fair trader and all want to be square with crap....

Sooooo... that said.... here's a pic... What's the High/Low/Median to most of you folks...




And the bolt is missing the foamie....

DM

[J_Kizzy]

What valve is in it currently? I'd be happy to offer you $50 for it.

[TnDeathInc]

250-350 pending valve

[wetwrks]

250-350 pending valve

I would second that.

[DevilMan]

Sorry about that... Valve that is in it is a MicroMag Valve # ~> GFX001953 running LVL7 bolt.

DM

[punkncat]

Tree-fiddy!!!!!!

/monster please....

[DevilMan]

Please clarify guys... just to make sure...

That's all the parts in the pic??? Or are you just talking the Micro....

I'm talking all parts. Changer, Micro, X valve.... Or break it down into individuals if you wish.

Just wanting to make sure.

And thank you guys...

DM

[wetwrks]

Please clarify guys... just to make sure...

That's all the parts in the pic??? Or are you just talking the Micro....

I'm talking all parts. Changer, Micro, X valve.... Or break it down into individuals if you wish.

Just wanting to make sure.

And thank you guys...

DM

Ok, I would put the micro (with the valve shown in it) at about $200 - $250.

The X Valve would run about $180 - $200

The quick changer at about $25 - $30.

Thus a total at about $405 - $480

[DevilMan]

Thank you WETWRKS... that is pretty much where I was sitting at it as well. Wasn't sure what I had missed because the numbers we kept going with weren't really coming into focus and so I thought WTH, let me ask. And so I did....

Thank you for your estimate... Anyone else agree or disagree???

DM

[Ratt]

I would pay around $450.

[ElPanda]

What valve is in it currently? I'd be happy to offer you $50 for it.

funny joke

[Steelrat]

Sell the x valve and changer separately. You don't get as much for them in a package deal.

[TnDeathInc]

Ok, I would put the micro (with the valve shown in it) at about $200 - $250.

The X Valve would run about $180 - $200

The quick changer at about $25 - $30.

Thus a total at about $405 - $480

I fully agree with said assesment.

[ThePixelGuru]

[robertsr1811]

I havn't seen a non-RT Micro missing the stock barrel go for over $175.00 in a LOOONG time. I think a lot of these estimates may be way high for the market, especially now. You don't even have a matched gas-through.

You have a rare anno on it, but without the matching accessories that kind of gets canceled out.