with all the new guns going macrolineless..

[mostpeople]

... whats the point?

[Spider-TW]

... whats the point?

steam-cockerpunk

[cockerpunk]

its a heat exchanger ...

[Chrome]

Swap the foregrip for a gas through one with a t-fitting off the bottom exit, tap another hole in the other side of the vertical adapter, and you'll have two more!

[automagmasta]

That is awesome! I'm sure you'll never starve the valve on that thing.

the macro connecting left and right rail sides is NOT actually introducing air into the system, but instead just cycling dead air. if you have ever looked at an airthrough rail, you know that the ONLY ports that you can introduce air through is the front 2, the other ones are only open enough to run a gauge/lpr/extra dead air macro/ etc.

cp, what 'speedfeed' is on that revvy? I need one

[cockerpunk]

the speed feed is a sink drain rubber thing.

[Frizzle Fry]

the speed feed is a sink drain rubber thing.

"Name Brand" speedfeed:
$20 at a proshop or on the net, and they'll replace it if it breaks. After you mail them the broken one.

"Sink Drain Rubber Thing" speedfeed:
$5 at any hardware store, and you go buy a new one for $5 when/if it breaks.

Cockerpunk you are a man of logic. I personally use the "Part Of An Old Refrigerator/Ice Maker" speedfeed :)

[cockerpunk]

it was more of a, damn, my lid just broke

well everywhere had new lids for 10 bucks

i was like skip that ...

[automagmasta]

I see a trip to the hardware store in my near future...

I need a new tap set anyway, whats another 5 bucks?

[Frizzle Fry]

it was more of a, damn, my lid just broke

well everywhere had new lids for 10 bucks

i was like skip that ...

I hear ya on that. I'll be home-sweet-new-home by Sunday so I'll shoot you a PM then about that feed you wanted. I almost forgot and then I saw this thread Anyway, next move for you should be to nix that macro and toss some good ol' fashion braided SS airlines on there, or even R/T style hardline. It'd look like some sort of supercooled ray gun and also be clunky and unmodern (which is generally awesome).

[automagmasta]

I hear ya on that. I'll be home-sweet-new-home by Sunday so I'll shoot you a PM then about that feed you wanted. I almost forgot and then I saw this thread Anyway, next move for you should be to nix that macro and toss some good ol' fashion braided SS airlines on there, or even R/T style hardline. It'd look like some sort of supercooled ray gun and also be clunky and unmodern (which is generally awesome).

so basically, it'd be oldschool.

[Frizzle Fry]

so basically, it'd be oldschool.

:)

I remember when somebody suggested I get a macroline setup... I'd never heard of it, but I said "no" for years assuming it would be torn out of its fitting by branches, brush, rocks, etc. Anyway, two or three years back I caved because macro is simple, cheap, and held in to the fitting by pressure. Fast forward 3 weeks, and I see a kid at a local field snap the tip of a fitting and vent 40something cubic inches of air into his mask. I still use it on many markers, but I run new "oldschool" setups all the time :)

Anyway, waiting on more of Cockerpunks franken-air innovations :P

[automagmasta]

I did this one first.


jk

[Ninjeff]

Thats got all the right makings of a bad arsnic steam punk gun.

[Zygote]

Needs more gauges!