X Mag / Changes - pic heavy

[Loguzzzzzz]

I believe that the breech was done incorrectly and is flipped backwards.

[Ando]

Ando heelllpppp !!!

Hahaha

It starts with T and ends with E.

[Smoothice]

I believe that the breech was done incorrectly and is flipped backwards.

don't go re-wording my answer. Since the valve isn't in the breach is backwards.

[maniacmechanic]

I did also happen to notice that there is no breech in the picture of original parts and no warp breech either. That would be nice since you are having a warp done too.

Unless your picture is reversed which I don't believe it is, the detent is on the "passenger" (wrong) side.

All my X mags have the detent on the "drivers" side.

BING BING BING , you win the qewpie doll
When he dipped it , the breech was in backward , so the pattern is off when it is installed correctly

[Smoothice]

BING BING BING , you win the qewpie doll
When he dipped it , the breech was in backward , so the pattern is off when it is installed correctly

Oh BS

He gets credit for his edit? WTF


If anything we tied on the answer

[maniacmechanic]

Oh BS

He gets credit for his edit? WTF


If anything we tied on the answer

I'll go with that , I don't have any dolls anyway

[Loguzzzzzz]

BAH!

I actually called the exact problem, you only noticed the location of the detent!

I WIN! ! !

[Smoothice]

OK edit

[my automag]

[koleah]

If the breech is in backward, how did you get the barrel in? I thought the barrel would only go in if the breech was in the correct way.

[maniacmechanic]

not sure whos to blame for the backward breech , i'm not worried about it and am leaving it like it is

the barrels not all the way in

[kcombs9]

edit nvm I'm too late

[theGOLDENchild]

I'm wondering if it will function properly with the paintballs not dropping in the correct spot and the detent behind the paint when it falls.

[Smoothice]

I'm wondering if it will function properly with the paintballs not dropping in the correct spot and the detent behind the paint when it falls.

No. Besides those 2 problems. The barrel can't thread in far enough. And the valve can't be installed.

[koleah]

not sure whos to blame for the backward breech , i'm not worried about it and am leaving it like it is

the barrels not all the way in

Can we get a picture of it with the breech in correctly?