printed rails, Interest thread

[knownothingmags]

Material is ABS PLASTIC. 8"x8"x8" (corner to corner is more, Pythagorean and all. )
this is NOT PLA, NYLON, CARBONFIBER, etc.

ABS is what I print for now.
Right now I print a successful 1 micron layer thickness.
(developing lower close to .5 microns, hopeful for .25 microns(beta))

anyone interested in these?
non forgrip or with forgrip hugging to the frame trigger guard.

-can do multiple colors.
-does NOT come with Z-lock pin channel
-I have slim designs
-am open to ideas of new designs
-can design am/mm sear or RT sear channels

***these are the lightest working rails I know of,
no one has printed a successful carbon fiber rail, that I know of;
since there is only one carbon fiber printer that has just been recently invented.(may be mine soon here's hoping)

let me know what you think.
oh and I can always just print you a square block rail if you want.


___________________________________
you can NOT at this time run air through this printed material I offer. to do so is wrong and can result in injury.
_____________________________________________
questions please ask.

*****prices will not be discussed here.******

and if you are appalled by this idea, totally hate it please let me know.

thank you,
KNMPS

**I WILL NOT PRINT IN WHITE, it has a different composition then colored ABS, and is therefore more weak. I will not produce anything in white, will not release any product in white.

[knownothingmags]

reserved for pics as requested.

**-non-fore grip-**


-this one will not stay the same will have modifications-
will not over hang unless customer specifies.

_________________________________


__________________________________________________ ________

[C_losjoker]

that is very cool, could be interested in this.

[knownothingmags]

that is very cool, could be interested in this.

any questions or thoughts can be messaged or posted up.
just let me know.

[Frizzle Fry]

any questions or thoughts can be messaged or posted up.
just let me know.

Are you 3D printing now? Can you make me some barrel tips for a 7/8" barrel?

[Nobody]

i'd take one, just to play around with. put it on Loguzo's account

[knownothingmags]

Are you 3D printing now? Can you make me some barrel tips for a 7/8" barrel?

pm me with details
all things need to be tested, before release of course.

I have yet to learn how to create threading,
I have some people that may be able to speed that process along though.

[Frizzle Fry]

No threading necessary. And if I may say it, I would be all over these rails you're offering if I had more guns that took rails

[knownothingmags]

No threading necessary. And if I may say it, I would be all over these rails you're offering if I had more guns that took rails

gotcha
no rail how do you stay on the roller coaster?

[river031403]

Pretty cool work.
Remember once you state a price it gets sent to dealer section so make sure your set and good with it before you disclose a price.

[mpsd]

When I say the first post, the super-small Sydarm rail was the first one that came to my mind. And then I scroll it down and what do I see? LOL I'm in for one like that, depending on price.

[Grelvire]

Interested, looks good.

does the ABS have any give that could cause cycling issues?

[blackdeath1k]

If the printed abs works like all the abs I use in bodywork and fab. It should work great. It will ding. But I try to take care of my markers. Im curious as to what price point these will be. And my head is spinning on overall design options. BUT I'm too cheap to purchase one most likely.

[knownothingmags]

Interested, looks good.

does the ABS have any give that could cause cycling issues?

there is give as in any plastic.
tighten the rear valve thumb screw properly and it will operate fine.

if you do a forgerip there is some flex that is why im not offering RT length. that flex does not hinder cycling of the marker.

[Spider-TW]

You think the threaded area and sear pin support will last? If not you could always make room for some inserts.

Most mag rails have that sear centering zig-zag. For printing, you could just throw in a nub on each side.

On your sydarm rail, you could put a short picatinny extension, for your laser, don-cha-no.