Pneu kits ready.

[knownothingmags]

magnet mods ready (if you feel you need them that is )
20151122_141445.jpg20151122_141455.jpg

[knownothingmags]

magnet mods ready (if you feel you need them that is )
[ATTACH=CONFIG]92033[/ATTACH][ATTACH=CONFIG]92034[/ATTACH]

the one on the right the reason the magnet holder is cracked is because it is a V1, the new versions are the right size to hold the magnets very nicely.

[barkingspider]

I assume you're gluing the mag mod on? I've always wondered if mounting the side near the valve through the mounting holes would be better than gluing it to the top? Meaning provide the mount to utilize the screw holes. Not sure if I'm explaining myself well?

[knownothingmags]

I assume you're gluing the mag mod on? I've always wondered if mounting the side near the valve through the mounting jokes rather than by hlue. Meaning provide the mount to utilize the screw holes. Not sure if I'm explaining myself well?

if I have time ill make some that utilize one of the mounting holes.
but I will be using epoxy

just like all the guys have done in the past.
as long as you don't go torking on the parts they tend to stay in place.
__________________________________________________ ___________

ill kick the design to utilize the mounting hole in the msv 2 tomorrow,
this will allow for no epoxy

[knownothingmags]

magmod ount.png

like this?

[barkingspider]

Yep......exactly. I'd be interested in a couple of those mounts that don't need epoxy and utilize the mounting holes.

[knownothingmags]

Yep......exactly. I'd be interested in a couple of those mounts that don't need epoxy and utilize the mounting holes.

lol I just printed off 100 of the other yesterday at work.
ill have to try to get these 100 done again this weekend maybe

[luke]

With the correct materials you could print a new MPA-3 ram, combining the piston/oring carrier and ram in one part.

[knownothingmags]

With the correct materials you could print a new MPA-3 ram, combining the piston/oring carrier and ram in one part.

yeah I know right,

I have all of the materials in my office to do it.
just need to get a printer back in my hands lol

and to do some real testing.
I want to make a setup and bring it to tunaball if I can make it.
that would probably be the best testing I could think of, next to handing out free samples, and not getting feedback.

[knownothingmags]

magnet mods (msv 2 magnet returns) complete

just waiting on getting my msv2s in

[knownothingmags]

20151130_183410.jpg

with these magnet mods you will have to unscrew the mounting screw and pull it out to adjust the magnet screw.

[knownothingmags]

FINALLY!!!! got my msv 2s in.
ill throw a thread up tonight in dealers section detailing the kits that will be offered.

[BigEvil]

Have you posted this in the AGD pages on facebook?

[knownothingmags]

Have you posted this in the AGD pages on facebook?

no not sure how. lol

dealer thread up

[going_home]

Have you posted this in the AGD pages on facebook?

You do realize that there are a huge amount of people that reject the privacy invasion of the so called social media ?

........