New Nummech Gas Thru Frame

[emo.83]

That makes sense I wasn't aware of the longer post option until you mentioned it and I looked it up. Thanks

[captian pinky]

Question about the macroline fittings. I've seen pictures with this frame showing a short run from the outlet to the valve but looking at my mag the fittings would be offset in height. How are people getting the macro fittings to line up well enough to use such a small line? Being so short there wouldn't be much flex allowed from the line.

They are using ccm fittings. They make 2 different post heights. So you need 1 short one on the valve and one long one on the frame.

[emo.83]

Question about the macroline fittings. I've seen pictures with this frame showing a short run from the outlet to the valve but looking at my mag the fittings would be offset in height. How are people getting the macro fittings to line up well enough to use such a small line? Being so short there wouldn't be much flex allowed from the line.

[Jay419]

Just did what you suggested. Hopefully he will reply back.

*UPDATE*

Frame is finally on its way back to Nummech. Hopefully everything gets straightened out.

[ascinder]

I contacted him on FB, he replied right away. Might try that.

[Jay419]

Trying to! Emailed again on Monday, but still no emails back from them. Looks like I may have to do the return thru PayPal and find a different frame that I like. Sucks too since I like the frame and not having the 12” of macro hanging off the marker.

[going_home]

The front frame screw hole is drilled crooked and will not thread into the body without modifying the front screw. I have it Micky Moused for now by grinding the screw down where it passes through the frame. Not really ideal. Also the air passage setscrew protrudes out of the back hump in the frame and is super sharp. It seems to be Red Locktited in not making for easy replacement with a shorter one. Thats all that I’ve found FOR NOW since I haven’t even aired it up yet. I have been waiting patiently to hear back from them to no avail.

If its drilled wrong I wouldnt fool with it.

It needs to go back to Andy.....

[captian pinky]

well i can say for a fact that i have had at least 6 come across my bench that had not had the screw issue. as far as the set screw that seems to be a simple fix.

[kfletch]

I mean don’t get me wrong, I really like the frame. I would just like to get the issues resolved so I can use it.

Wow, how does that even make it past QC?

[Jay419]

I mean don’t get me wrong, I really like the frame. I would just like to get the issues resolved so I can use it.

[Jay419]

The front frame screw hole is drilled crooked and will not thread into the body without modifying the front screw. I have it Micky Moused for now by grinding the screw down where it passes through the frame. Not really ideal. Also the air passage setscrew protrudes out of the back hump in the frame and is super sharp. It seems to be Red Locktited in not making for easy replacement with a shorter one. Thats all that I’ve found FOR NOW since I haven’t even aired it up yet. I have been waiting patiently to hear back from them to no avail.

[mobsterboy]

I just wish he would answer his emails. Got mine 2 weeks ago and it’s un-useable as is. Pretty crappy customer service if you ask me!

I'm sure he isn't ignoring you on purpose. What kind of problems you got, homie?

[Jay419]

I just wish he would answer his emails. Got mine 2 weeks ago and it’s un-useable as is. Pretty crappy customer service if you ask me!

[captian pinky]

What ever happened to their pneumag kit? It looks like you would have a hard time fitting a normal LPR in there, let alone Luke's. Did anyone ever successfully pneumag a nummech?

He is working on it like everything else he has going on.

mag frames both single and double, cocker frames, cocker bodies, etc. all of which is on the side of his day job...

[ascinder]

What ever happened to their pneumag kit? It looks like you would have a hard time fitting a normal LPR in there, let alone Luke's. Did anyone ever successfully pneumag a nummech?