Hybrid RTP Rails

[BigEvil]

[ElGringo]

I do need to make more of the 9" ones so I'll do the 8" version too while I'm at it. I'll work them in this week sometime. Thanks

Still interested! Going to PM's captain.....

[luke]

If anyone wants an 8" Slimline chime in.

I do need to make more of the 9" ones so I'll do the 8" version too while I'm at it. I'll work them in this week sometime. Thanks

[awo702]

Hybrid RTP Rails

If anyone wants an 8" Slimline chime in.

[luke]

Would this be completely your design including the valve or would it be an automag variant?

I'm not ready to elaborate any further at this time, it's way to soon.

[Loguzzzzzz]

I'm not interested in making pump kits or parts, but you may eventually see a complete pump marker from me.

Would this be completely your design including the valve or would it be an automag variant?

[luke]

I'm not interested in making pump kits or parts, but you may eventually see a complete pump marker from me.

[Nobody]

You are not a customer, but you do have a knack for reassigning meaning to sentences that you don't have a come back for.

I play paintball. I buy stuff, ergo i am a customer. Just because i never bought anything from you, only means that you have never had anything i wanted.

Here, you want another part you could design? How about a pump kit? Pump rods, mounting blocks, pump handles. All in one kit or by pieces. There is always a call for it, you can even vary the mounting block to include a vert adapter, foregrip or even clean with no attachment. Since you always get calls for pump milling on your rails, why not have an all in one kit? Only makes sense. Love to see your version of that...

[luke]

The over-all design is really up to JBF since its his vision, the only changes I'll make to the final design are little ones that are tooling and machining related. The basic idea is really a little to complicated to offer variations so you guys need to settle on a single design and I'll pick it up from there.

Side note:
I'll deal with the design around the sear pin since I have the specs on what is the cleanest way to deal with it.

[Apathetic_Chaos]

I'll need the length measurements, preferably pulled from center line of the thumb screw and front grip screw holes, forward and back. Unless its either a standard 8 or 9 inch rail. (I'm definitely not going to do both, there's way too much work in this design)

If anyone wants one of these speak up. I'll probably only make these once, they wont be a stock item, and I doubt I'll make extras...




[ATTACH=CONFIG]100253[/ATTACH]


[ATTACH=CONFIG]100255[/ATTACH]

Personally I'd be good with a standard 8" rail, though personally I would love to see the front portion converted into a picatinny style section. But either way I'll be in for one

Sent from my SM-G960U using Tapatalk

[luke]

Just ordered the 9" one, but I think my pump chord would look better on the smaller 8" rail. Any chance you are going to make one?

Hey ElGringo, I reviewed the CAD and the change really isn't that much work and I dont have a problem adding it to my standard inventory list. So hit me up if you decide you want one.

[luke]

I'll need the length measurements, preferably pulled from center line of the thumb screw and front grip screw holes, forward and back. Unless its either a standard 8 or 9 inch rail. (I'm definitely not going to do both, there's way too much work in this design)

If anyone wants one of these speak up. I'll probably only make these once, they wont be a stock item, and I doubt I'll make extras...

I'd be in on a Deco rail

[luke]

Just ordered the 9" one, but I think my pump chord would look better on the smaller 8" rail. Any chance you are going to make one?

I didn't really have plans to do an 8" version but I can.

[luke]

You are not a customer, but you do have a knack for reassigning meaning to sentences that you don't have a come back for.

[Nobody]

That's more than a little presumptuous to say the least, there is no way you would know what my customer base is.

I am a customer. I am part of your base. This is why we get together as a community on this forum to show, discuss this thing called paintball. It is very simple. Look at what people are building, look at what you can do, put the 2 together and come out with something better than what is out there. Hell, with XMT being shut down, i would be putting out a body, instead of trying to reinvent the rail.