**AO Research Team Test This Please**

[X-Plosive]

Well the superbolt edge is about a 5. I haven't chopped in atleast 2 months and haven't had a barrel break for about 6. I play around 3 times a month

[Brian68mag]

Standered SS bolt,
60 Degrees
Paint Kick'n and Superswirl(rofl ran out at the shop)
Superswirl test "1,0,0,1,2,0"
Kick'n "2,3,3,2,2,4"
500 SS shot and 1000 Kick'n
NO BREAKS, OMG, the shockers, timmies and matrix's broke balls and i broke NON.
Amazing stuff tom..

[Bwaites]

Ok Tom,

Caught on to this a little late, but...

Weather 60 degrees, raining intermittantly, very lightly.

First Paint RPS Premium Advantage

Bounce: 7,7,7,9,3,3,7,5,6,7

Emag with modified foamy Superbolt: about 2-3 in scale

3 break in 25 shots all in barrel, oops checked only one ball for size, rechecked paint size and change to slightly larger bore CP, No breaks in next 400 shots, shot straight and chronoed 270.

Classic Feed Automag with modified longnose, not foamy, about 2-3 in scale. (My sons gun, him on trigger)

No breaks in 300 balls.

Second Paint All Star Advantage

Bounce 2,3,3,3,6,7,3,3,5,4

Emag as above: 2 breaks in 500 balls, both in breech (chops). I checked ten balls for size first!

Classic Feed Automag as above: 3 breaks in 300 balls, 2 in breech (chops), one in barrel.

Hope that helps. This was fewer ball breaks than when we normally play, but the weather is a little warmer.

My electronic trigger is on the fritz, so this was all on manual, Halo on the Emag, Brass Eagle 12 Volt Viewloader on the Classic.

Bill

[JasonNeal]

all bolts?

sorry to interrupt all this flow of info for you tom. this sounds like an awesome way to improve a marker. i dont have a mag though, i have a black dragun. i just wanted to make sure that this can be done to ANY bolt, not just any mag bolt, right? i would prefer waiting for a reply to not waiting and crunking up my bolt . thanks to whoever can answer this for me.

jason

[Bonx0007]

Some people have to blaze the trail. Try it out.

[RT_Luver]

If I had a gun I would do this. I might with my dads RT PRO. I'll post the results if I do

[BlackVCG]

This should be done to the bolts on ALL guns. Since they all work the same way and if the outside edge is sharp, it will fracture the next ball inline. Granted most of the other bolts don't rotate like the Mag bolt, it won't hurt anything to round the entire circumference of the bolt face on bolts in guns where the bolt doesn't rotate.