Level 10 degassing issue?

[cphilip]

No...it realy wasn't a stupid question...but it was one that was answered already if you had read this thread!

[cphilip]

I am unsticking this thread ad a link to it is now in the "Classic: All LVL 10 Info Here" thread.

[FrAuStY]

I have found a simple...no cost solution to the degassing issue for fixed tanks...using macro or microline. If you have a butt connector crimper like the one shown. (yes there are things called butt connectors) If you notice... you can loosely grip the macro/micro line with the crimper while using it as leverage to bleed the line. I used it to setup my level 10 as I don't have fittings for my degas valve I bought for fie dolla! (make you holla!). Anyway...its a temporary solution to a permanent product of the low impact bolt system. Anyway figured it'd save you some fittings... just remember... don't squeeze the crimper too hard, let slide along the gas line and depress the fitting seat. Works wonderfully.

BTW.. MY LEVEL 10 ROX!!

[TransMan]

could someone please tell me if this www.paintballgear.net/039-5500-3.html slide check bleeds the airout of the gun? thx

[TransMan]

i would really like it if some one would answer my above question thx

[Top Secret]

Yes, that will bleed the air out. I recommend Pro-Connects. Mine has worked fantastic. Another idea, on my Conquest tank that I use with my cocker setup, by shutting off the tank, it bleeds out all the air in the gun and line. Just a feature that I liked about it. For other air tanks(that can actually power the Lvl 10, just get a pro-connect or slidecheck.

[Shirow]

How do other tanks connect then? I thought all tanks screwed in. Sorry if this is a dumb question

[manike]

proconnect! It's the best thing I have added to my guns since level 10! thanks a huge bunch to Tunaman who got them for me (he can get them for anyone). You can't get them over here easily (I've certainly never seen them often here) but they are worth every penny.

here's a pic on my gun...





in fact they are so good I may go start another thread on them

manike

[hitech]

Originally posted by Shirow
How do other tanks connect then? I thought all tanks screwed in. Sorry if this is a dumb question

Adjustable tanks usually do not screw in. They connect via a hose. You can see most of it in the link to my marker in my signature.

[Shirow]

Oh, I see.. thanks!

[Doobie]

The guys at Planet were able to get there hands on a old but un-used Venom hardline Deluxe for me. It has a bleed built into it and the pipe looks very clean running from my vert adapter to my vavle. Gets rid of that "hose everywhere" look that mags are notorious for.