I just bought a pure energy hpa system with the thor reg. This is the first time I've ever used HPA. When I attempt to screw the tank into the reg it starts venting out a little hole on the side of the reg where the threads are. I think this is a bleed off but it seems to be "bleeding on" for some reason. I can't even get the gun aired up because it will just vent all my air out. Does anyone know why it would do this?
-
-
hows the o-ring on the tank? if its no-good then replace it.[*img]http://www.browndotdesign.com/Xodus/AO/YeahThatsMe.jpg[/img]
Image too large- Tato -
brand new tank first time ive aired it up...did try a different oring just in case...no luckComment
-
I'm not familiar with the THOR, but does it have an on/off valve? Maybe it's in the ON position?
What kind of ASA are you screwing it into?Comment
-
The thor reg is a reg that mounts on a rail to your grip frame and the tank actually screws into the reg itself. I don't think it has an on/off. All I see is a guage and the quick disconnect nipple, as well as the reg adjuster.Comment
-
I was just looking at the pics of that thing on pbgear and that looks weird with no on/off.
One of the guys I play with has that same bottle and reg, I'm gonna go meet him and some other guys for a drink. I'll ask him about your problem and post later tonight/tomorrow morning. Unless someone else helps you out, give PMI tech support a call on Monday.Comment
-
anybody else have any ideas id like to get this thing working tonight if possible. it cost me $350 and it doesn't work right from the start...very frustrating. its probably something real simple though. thanks.Comment
-
Umm, i personally use a crossfire, but it might not be something simple, but you may want to contact pure energy about it and i know that the 2 stores in my ares refuse to sell pure energy's because of that very reason, they leak alot.AIM- TheJester493 IM me some time
take a look at my minimag
....
http://www.automags.org/forums/showt...threadid=64837Comment
-
Well I just tested it out with a standard asa, and it worked. So I guess the problem lies in the thor reg...Comment
-
That guy I spoke with said he had problems whith his THOR too, so he just uses a screw in ASA, Custom Products, because the thor gave him nothing but problems. Doesn't really help, sorry about that.Comment
-
Yeah I think I'm going to call pmi and see what's up. Anybody know if they are open on Sundays?Comment
Comment