The new DYE air systems

[OldSchoolMag]

Magman, I run 800 on my RTPro, and have no problems with it. And seeing as the valves are the same, there should be no difference in the way the guns operate except for the fact that the SFL is electroninc. So, unless that board chews up another 50+psi, it should run just fine. Besides, if they buy the adjustable tank, then they can crank it up as high as they wish.

Oh, and Ron - it shows the weight of most every marker that WGP produces right on their web page. In fact, it's the first fact they offer about the 'gun - other than its name.

No offense, but half the stuff posted in this thread that's either wrong or just speculation could have been left out if you'd done one thing - ACTUALLY READ ABOUT THE PRODUCT. If you just speculate and assume based on little to no facts, guess what - you're doing the exact same as the people we have been trying to convince otherwise for many years.

You all back up Mags with information and attempt to prove people wrong about the "Myth of mags chopping" but when it's another product by another company being discussed, who cares, right? Simply because it isn't AGD producing this tank it must suck, and because some kids on the PBNation board nicknamed the new Spyder anti-chop bolt "LX" let's all freak out and point out who owns the name "Level 10" just because they are giving OUR PRODUCT PROPS for being one of the first bolts to effectively stop bolt chops.

Until there is some information available - not that half of you would read it anyways, but some would - let's not judge it, allright? It's not available either, so you can't pull that "I heard" crap, either. What we know (or SHOULD know) is right on that page that barely anyone went to, and the rest of it will be released later when the product is out.

I swear, when people post how AO is better than places like PBNation, I just think "for how long".

OSM

[rdb123]

Originally posted by OldSchoolMag
...Oh, and Ron - it shows the weight of most every marker that WGP produces right on their web page. In fact, it's the first fact they offer about the 'gun - other than its name....

Ah sorry, I was thinking about something else at the moment; mainly because I couldn't readily find the output on Centerflag tanks very easily. Therefore, I had to go run over to ActionVillage to find it.

Point well taken though.

-Ron

[cris8762]

magman007, please dont go spouting off informations about what gun works well on what

i know for a fact that a impulse works much better using a high pressure out put tank than a low pressure, because at high rates of fire a low pressure tank will starve the max-flow regulator which neeeds a high pressure input

[sniper1rfa]

well, yeah. because for barrels, strength isnt an issue, so they can make it really thin. however, you could do the same thing with an aluminum barrel and still not break it. and if both have the same strength, do you want it for 45 bucks a pound, or 1.50?

im sure you could bring the barrel down to like 3/32" thick without sacrificing too much strength (excluding threaded areas). :)

[magman007]

Ron, yes i have an sfl


OSM if you read, i stated earlier that a retro likes about 750-1000 psi, those are the usual opperating pressures, altho i have herd around 650 and up before


I said 850 will work fine, as i was relating to the 850 preset tank

now chris, what if your running a bottom line maxflow, and single regging the impy? i dont think you want to blow 800 psi into that little solenoid now do you? i didnt think so....


My information about markers and imput pressure, including the angel, was stated clearly enough, i thought you had understood that.


Any information i have gotten wrong, please feel free to correct me, but i will elt you all know, i study my markers just for occasions like this.

Ron, i currently use an 850psi out put system x tank. it does its job, but im looking to get something a little more adjustable, and probally looking into a flatline reg


any more accusations or questions?

[OldSchoolMag]

the air will not put out enough to run your sfl efficiently

You don't do well keeping consistant with your views, do you?

I was telling you that you were wrong in your above quote, and instead of just accepting it modestly like Ron did, you tried to turn it around like everyone is against you. Let's not turn this into a flame war allright?

OSM

[magman007]

air= ANGEL AIR


sorry, i thought after i posted, hmmm i wonder if that is what he is talking about. Im sorry for that, and for all the controversy... hehe! are we ok now? the angel air goes to about 600 psi, and will not supply the rt valve well

[OldSchoolMag]

OH! I agree with that full heartedly:)

Sorry about that before, yeah - we're good now.

OSM

[magman007]

haha, its my fault entirely for not Capitalizing the proper name and not being clear enough. I do that some times. Glad everyone is happy! :) :) :) :) :)

[cris8762]

magman, you are talking about something very different than what i was talking about......

you are thinking about someone buying a impulse WITHOUT a standard bottomline maxflow that it comes with, you are thinking of a Maxflow tank system.....in that case then YES you are using a low pressure reg that is going DIRECTLY INTO THE GUN

i was referring to using a LP screwin or adjustable tank on the stock maxflow that comes with the impulse, then you would end up starving the reg at high ROF

and besides, most imps have pressure release valves that go off at 240 psi so you dont blow your solenoid

[magman007]

yes, and i was reffering to most top of the line markers being low pressure markers because of their noids.... i used the example of the angel, and that was meant to carry for the other markers as well, sorry this was un clear.