micro bodies...

[MinimagRockin']

Would there be any problems with a micro body on a mag with a rtp valve, lx, and intelli?

[pbguy888]

All should work fine , one thing though. Vert. or powerfeed micromag bodie? And old or new style intelly trigger gaurd?
A guy at pbr's vert. micromag wouldnt work with the old style trigger gaurd because it got in the way of the foregrip. Thats only thing. :) He just bent it and it was fine.

[Bulldog]

Get a new style intelli like this:

[personman]

Or you could just take a hammer to it

[pbguy888]

If you buy one new you will most likely get new style. But you only have to have the new style if its vert. feed. Old style fits on powerfeed bodies.

[Kevmaster]

also, be sure to contact PTP about getting a new sear assy and on-off pin. i know the on-off pin changes and im 95% sure the sear is slightly different on the Micro bodies...shouldnt cost mroe than $50 to get those two new itesm

[dcmander]

Originally posted by kevmaster
also, be sure to contact PTP about getting a new sear assy and on-off pin. i know the on-off pin changes and im 95% sure the sear is slightly different on the Micro bodies...shouldnt cost mroe than $50 to get those two new itesm

Is this absolutely necessary??

[street1356]

wut is new about those besides that little curve

[pbguy888]

Absolutly nothing to my knowlege. It just allowed it to fit with a wider range of foregrips with the bump.

[Bulldog]

the on-off pin changes and im 95% sure the sear is slightly different on the Micro bodies

I think this is for the emag micros, not the normal or RTs. I think it has to do with that shim they put between the body and frame. I think.

Anyway, my sear isn't any different. It's the one that comes with the Retro. I've got rt,lx, and inteli and it rocks.

wut is new about those besides that little curve

Nothing, I think.

[Kevmaster]

ok, so maybe im wrong...it wouldnt be the first time in my life...just ask my latin teacher