micro bodies...

[MinimagRockin']

Would there be any problems with a micro body on a mag with a rtp valve, lx, and intelli?

[pbguy888]

All should work fine , one thing though. Vert. or powerfeed micromag bodie? And old or new style intelly trigger gaurd?
A guy at pbr's vert. micromag wouldnt work with the old style trigger gaurd because it got in the way of the foregrip. Thats only thing. He just bent it and it was fine.

[Bulldog]

Get a new style intelli like this:

[personman]

Or you could just take a hammer to it

[pbguy888]

If you buy one new you will most likely get new style. But you only have to have the new style if its vert. feed. Old style fits on powerfeed bodies.

[Kevmaster]

also, be sure to contact PTP about getting a new sear assy and on-off pin. i know the on-off pin changes and im 95% sure the sear is slightly different on the Micro bodies...shouldnt cost mroe than $50 to get those two new itesm

[dcmander]

Originally posted by kevmaster
also, be sure to contact PTP about getting a new sear assy and on-off pin. i know the on-off pin changes and im 95% sure the sear is slightly different on the Micro bodies...shouldnt cost mroe than $50 to get those two new itesm

Is this absolutely necessary??

[street1356]

wut is new about those besides that little curve

[pbguy888]

Absolutly nothing to my knowlege. It just allowed it to fit with a wider range of foregrips with the bump.

[Bulldog]

the on-off pin changes and im 95% sure the sear is slightly different on the Micro bodies

I think this is for the emag micros, not the normal or RTs. I think it has to do with that shim they put between the body and frame. I think.

Anyway, my sear isn't any different. It's the one that comes with the Retro. I've got rt,lx, and inteli and it rocks.

wut is new about those besides that little curve

Nothing, I think.

[Kevmaster]

ok, so maybe im wrong...it wouldnt be the first time in my life...just ask my latin teacher