R+D IDEA
Sounds like AGD is moving in the right direction, an idea to contribute to the pot. A basic electronic kit that retrofits into Automags, Minimags, Micromags, etc with the XValve and the INTELLIFRAME that works like the one in a Matrix where it's simply on/off with an LED light and that has a device SIMILAR to an eye but instead uses an eye set up to work with the sear so that it will only fire if the bolt is properly seated with the sear. Maybe an eye right below the rail. The specific functionality I do not know, thats up to AGD, but it would give the light trigger pull which any analog Mag user wants and would have a preventative device for sear and bolt damage. The Lvl 10 already prevents chopping enough so it's better to use the eye elsewhere (in the frame or rail) and it could fit in Intelliframes, keeping the cost down for current Intelliframe users and encouraging the sale of intelliframes instead of other aftermarket frames. The kit would almost be like the internals of a revi but a little higher powered and better built. The eye can illuminate green if firing right, yellow if on safety, red if not firing because of the eye saying it hasn't reset. Even if AGD does not persue this idea I am, but my technical knowledge is limited, ideas are always appreciated.
The idea again: basic tournament-legal electronic frame slightly similar to a Matrix with LED only for high-speed semiautomatic fire (no full auto) that will give all the benefits of an electronic frame to current Intelliframe users at a discount price due to the less expensive parts and no need of purchasing a new frame. An internal eye located below the rail to fire only when bolt is properly reset, preventing sear and bolt wear. Could even use a switch turned on with a rod similar to the sear rod but without the pressure resistance to activate the firing instead of a magnet to prevent faulty parts and keep the cost down while encouraging people to buy the XMag if they want a high-end electronic marker. LED can be housed in a new grip to install, parts internal to the frame, battery would be 9V internal to the frame. Best part: minimal R+D time and expenses as all components are available or modifiable from current AGD ideas, frame is already designed (I-frame) and out in the market, maximum reliability as it is a basic electronic frame installable and fixable by most, and the simplicity will keep the cost down.
One thing I'd be interested in knowing if anyone does that would play a role in the ROF of the frame: how fast can the bolt and sear reset? In other words, at what speed would the gun be firing too fast and firing again before proper reset?
Well Mr. Kaye or anyone else? Any input/ideas?
Sounds like AGD is moving in the right direction, an idea to contribute to the pot. A basic electronic kit that retrofits into Automags, Minimags, Micromags, etc with the XValve and the INTELLIFRAME that works like the one in a Matrix where it's simply on/off with an LED light and that has a device SIMILAR to an eye but instead uses an eye set up to work with the sear so that it will only fire if the bolt is properly seated with the sear. Maybe an eye right below the rail. The specific functionality I do not know, thats up to AGD, but it would give the light trigger pull which any analog Mag user wants and would have a preventative device for sear and bolt damage. The Lvl 10 already prevents chopping enough so it's better to use the eye elsewhere (in the frame or rail) and it could fit in Intelliframes, keeping the cost down for current Intelliframe users and encouraging the sale of intelliframes instead of other aftermarket frames. The kit would almost be like the internals of a revi but a little higher powered and better built. The eye can illuminate green if firing right, yellow if on safety, red if not firing because of the eye saying it hasn't reset. Even if AGD does not persue this idea I am, but my technical knowledge is limited, ideas are always appreciated.
The idea again: basic tournament-legal electronic frame slightly similar to a Matrix with LED only for high-speed semiautomatic fire (no full auto) that will give all the benefits of an electronic frame to current Intelliframe users at a discount price due to the less expensive parts and no need of purchasing a new frame. An internal eye located below the rail to fire only when bolt is properly reset, preventing sear and bolt wear. Could even use a switch turned on with a rod similar to the sear rod but without the pressure resistance to activate the firing instead of a magnet to prevent faulty parts and keep the cost down while encouraging people to buy the XMag if they want a high-end electronic marker. LED can be housed in a new grip to install, parts internal to the frame, battery would be 9V internal to the frame. Best part: minimal R+D time and expenses as all components are available or modifiable from current AGD ideas, frame is already designed (I-frame) and out in the market, maximum reliability as it is a basic electronic frame installable and fixable by most, and the simplicity will keep the cost down.
One thing I'd be interested in knowing if anyone does that would play a role in the ROF of the frame: how fast can the bolt and sear reset? In other words, at what speed would the gun be firing too fast and firing again before proper reset?
Well Mr. Kaye or anyone else? Any input/ideas?
![CoFFeY[NiTrO]](data:image/svg+xml;base64,CgkJCTxzdmcgeG1sbnM9J2h0dHA6Ly93d3cudzMub3JnLzIwMDAvc3ZnJyB2aWV3Qm94PScwIDAgNTAgNTAnPgoJCQkJPHJlY3Qgd2lkdGg9JzEwMCUnIGhlaWdodD0nMTAwJScgZmlsbD0nIzczYjQ3NicgLz4KCQkJCTx0ZXh0IHg9JzUwJScgeT0nNTAlJyBmaWxsPSd3aGl0ZScgZm9udC13ZWlnaHQ9J2JvbGQnIGZvbnQtZmFtaWx5PSdBcmlhbCcgZm9udC1zaXplPSczMDAlJyBkb21pbmFudC1iYXNlbGluZT0nY2VudHJhbCcgdGV4dC1hbmNob3I9J21pZGRsZSc+QzwvdGV4dD4KCQkJPC9zdmc+CgkJ "CoFFeY[NiTrO]")
lol
Comment