Rob's ULE Butchery

[RobAGD]

Well Old Fugly got a work out Sunday.

I should 4500-5000 balls out of it in 5 games ( never finished a game with the gun because I was running out of air as I am a back player now not a mid )

In that I broke 1 ball in the barrel from a double feed.

All told I shot a bit over 6000 rounds for the day and I broke more paint in the borrowed guns than mine

The pics above are first shots, so far I have smoothed all the edges, and rounded down the pivot pin bumps. My Chipply feed neck wouldnt play nice so it got the dremel treatment too I try to snap a few pics tomorrow of the gun together.

-Robert

[cockermatt]

Originally posted by RobAGD

The pics above are first shots, so far I have smoothed all the edges, and rounded down the pivot pin bumps. My Chipply feed neck wouldnt play nice so it got the dremel treatment too I try to snap a few pics tomorrow of the gun together.

-Robert

We all know Chipley make nice quality products.

[RobAGD]

Out side the shop today wanted the sun for the pic.

You can see the area on teh feed neck needed to be thinned down a bit to make it in all teh way into the body. I wanted the neck and body to have the most thread contact I could manage so I had someone turn it down a bit but it wants enough so I broke out the Dremel tool of death.

You can also see that I have started work on softening up the sear pin bumps, I am still not happy with that and when I get a cloth wheel for teh shops bench grinder I'll see what havoc I can wreck with that.

I hand filed down all the sharp point on the rail so there is nothing sharp on it. The Grip will get the same treatment.

-Robert

[darklord]

[Marchborne]

Dremel madness!

Rob, yer a sick, sick puppy.

Now make me one (only half joking). That's it, I'm stopping by the store tomorrow night to check it out.

Very nice work.

--Carl.

[cockermatt]

Originally posted by RobAGD


Out side the shop today wanted the sun for the pic.

You can see the area on teh feed neck needed to be thinned down a bit to make it in all teh way into the body. I wanted the neck and body to have the most thread contact I could manage so I had someone turn it down a bit but it wants enough so I broke out the Dremel tool of death.

You can also see that I have started work on softening up the sear pin bumps, I am still not happy with that and when I get a cloth wheel for teh shops bench grinder I'll see what havoc I can wreck with that.

I hand filed down all the sharp point on the rail so there is nothing sharp on it. The Grip will get the same treatment.

-Robert

Where is the 16??

[Aliens-8-MyDad]

got a weight on it?

[ah137]

Well rob you beat me too it, that is very close to what I have in mind for my emag. All you need is a ule grip and get it anodized. Looks great, keep it up

-Hills

[RobAGD]

OK some more was done I have the dremel screaming ! Muhahahhahah*cough*hack*wezzz*

Ok here are the newer pics of the body. Btw I swung by Giant on my way home to use thier produce scales to weigh the bodies.

Stock Emag Rail & PF Body with PF Plug 1lb

Rob ULE Body & Rail & Feed Neck .45lbs SWEET !

Now If I could just get a scale that can measure grams I would be set.









All Hand done with a Dremel, for referance take a look at the first set of pics in this thread

-Robert

[cockermatt]

Looks pretty damn good, now only if my project works out as smooth.

Did anyone see yo useing the scales at Giant? I bet they were like 'what in the hell is that guy doing?'


Maybe try the post office next time, then have some damn nice scales.

[LaW]

Originally posted by RobAGD
OK some more was done I have the dremel screaming ! Muhahahhahah*cough*hack*wezzz*

Ok here are the newer pics of the body. Btw I swung by Giant on my way home to use thier produce scales to weigh the bodies.

Stock Emag Rail & PF Body with PF Plug 1lb

Rob ULE Body & Rail & Feed Neck .45lbs SWEET !

Now If I could just get a scale that can measure grams I would be set.

**Second posting of pics deleted ** RobAGD

All Hand done with a Dremel, for referance take a look at the first set of pics in this thread

-Robert

any pics with a barrel attached...... That looks excatly how i pictured the front of my new body once i get it.....

[RobAGD]

Nope, didnt bring a barrel home, Ill dig around and see what I can find and maybe post a few more pics.

-R

[pito189]

Pretty awesome looking. Good job Rob.

[crazayman]

i wanna mill mine down even further yet and wrap a layer of carbon fiber around it for stability. mabye i could make the whole damn gun down to 1 pound

[PzYcO]

you can "mill" with a dremel tool??