Custom Products neck spreaders work really well and are cheap (around $5.00). They come in at least three diffrernt sizes. Plus each spreader is adjustable.
-
X-Mag Black to Red Fade - Warped
RT Pro - Warped
"The Mags are back in town" -
o well
ken
skateboard=me=8 years
good traders:grey goose, coffeynitro, langrage, bond1313, flipirit, rogue factor, kirby, banziamf, thelar, BTautomag, Littmag, thilbo, dirtybunny, thing, xadamx
R.I.P Zach DalyComment
-
rico with the oring neck.....and no orings fits very snug. I use that with my warp..... I hated the revy in it.Comment
-
Guys! haha, although I appreciate ur advice, i found a solution of my own that is easy and cost nothing...
I was sitting at my desk looking at my gun pondering... I thought something to stick in the warpfeed with the hopper would make a tight fit, like making an uneven tabel leg stop rattling by putting paper under it! Yes paper! so simple... I got a small peice of paper, folded it up, stuck half of it under the panel that connects the gun to the warp and the other half to go slightly inside the warpfeed with the hopper, its a nice tight fit! No more falling out! I might get a picture of it sometime....AGD Mini Mag (hopper right)
Retro Valve
Warp Feed (smoke)
Black Intelliframe (blade)
Level 10 Bolt
Shocktech Drop
Dye Foregrip
All Macro Line
68ci/4500psi Crossfire /w Dye Tank Cover
J&J Ceramic 14" Barrel
Black 9volt Revy
Team Trigger Freaks! www.TriggerFreaks.comComment
-
oh i don't realy want a ricoAGD Mini Mag (hopper right)
Retro Valve
Warp Feed (smoke)
Black Intelliframe (blade)
Level 10 Bolt
Shocktech Drop
Dye Foregrip
All Macro Line
68ci/4500psi Crossfire /w Dye Tank Cover
J&J Ceramic 14" Barrel
Black 9volt Revy
Team Trigger Freaks! www.TriggerFreaks.comComment
-
-
I use a Rico 2k w/orings (orings have all fallen off somewhere) on mine. It actually fits a little better then a 12v revvy and needs no melting of the shell to make it tighter.Sorry, I'm oldComment
-
I drilled and tapped tthe body of the warp for 4-40 threads and put a couple set screws in there. holds the revy in very snug. you cant even pull it out of you wanted to.
"super multi-green mag" Cp barrels, LX bolt, no-rise, intelli, 47ci flatline, halo................
Red dragun body, turbo valve, 12" Boomstick, Spud magics anti-chop bolt with quickstrip, ELCD, nitroduck 68CI,Gas thru stock, 12V revy, AGD Warpfeed system
Xen's paintball pagesComment
-
Load says sandpaper, so you gotta go with sand paper. I mean, if Load SM5 says so.....Originally posted by Load SM5
Like a teeeny bit of sandpaper?
. Thats what I think. Besides, if I had the same problem, I believe 4 out of 5 Load SM5's prefer sand paper over the other leading remedy.
WE ARE DEADCELL, AND WE WILL RUN THROUGH YOU
Dayspring - "We've had Clare at Shatnerball." "I'm confident that she can take 20 guys."
"I'd trade my cocker for some steady pu**y"Comment
-
SoCalMag ive said it once and ill say it again. natalie is HOTTsigpicComment
-
natalie portman is the shiz!AGD Mini Mag (hopper right)
Retro Valve
Warp Feed (smoke)
Black Intelliframe (blade)
Level 10 Bolt
Shocktech Drop
Dye Foregrip
All Macro Line
68ci/4500psi Crossfire /w Dye Tank Cover
J&J Ceramic 14" Barrel
Black 9volt Revy
Team Trigger Freaks! www.TriggerFreaks.comComment
-
-
DUDe! she is soooo freaken cute... and hot omg... but u wanna see a screen shot i took of my desktop, i changed it from natalie portman to eliza dushku, that chick's pretty hott tooAGD Mini Mag (hopper right)
Retro Valve
Warp Feed (smoke)
Black Intelliframe (blade)
Level 10 Bolt
Shocktech Drop
Dye Foregrip
All Macro Line
68ci/4500psi Crossfire /w Dye Tank Cover
J&J Ceramic 14" Barrel
Black 9volt Revy
Team Trigger Freaks! www.TriggerFreaks.comComment
-
AGD Mini Mag (hopper right)
Retro Valve
Warp Feed (smoke)
Black Intelliframe (blade)
Level 10 Bolt
Shocktech Drop
Dye Foregrip
All Macro Line
68ci/4500psi Crossfire /w Dye Tank Cover
J&J Ceramic 14" Barrel
Black 9volt Revy
Team Trigger Freaks! www.TriggerFreaks.comComment
Comment