First day out with my Mag

[AirChunck]

My suggestion:

Gold cup oil

Spectra thermal 260 <-- Best mask I've ever own.

[Sledgehammer]

www.paintball-online.com . 30 bucks is really great for that mask. Only downside is the limited choice of colours they have: red, purple and one that is hard to define :cool:

[Shaft]

You don't need a fan for a VForce. Their no fog coating actually works.

[udtseal]

Yeah, I LOVE my vForce goggles. Never had a fog problem, then again, I dont sweat that much when I play, but when I was sweating heavily they never fogged once.

[Army]

Unless you broke a ball in the breech (chopped it), there is no reason to fully break down your gun to clean.

Remove the barrel, take out the valve. Wipe, rinse, squeegee the barrel. Wipe the bolt and spring free of any paint residue, then re-assemble. When you do get oil, simply put a few drops in the elbow that is on the AIR valve, or into the ASA's port. Leave the barrel off, gas up the gun, and fire about 30+ shots to blast the oil into all the internals.

If you really want to take the gun down to the tiny parts, watch the video closely. If you don't have the video, call AGD and ask nicely for it and any other freebies they may be giving out.

[Tunaman]

Well I take it you like the Mag I built for you? Let me know how it shot. Don't worry about oiling it up for a few times of play. It will be fine. I put a drop of grease on the sear(both ends), so you don't have to oil it. And don't put oil on the bolt and spring as someone mentioned above. Rob-AGD says "oil on bolt=BAD". So I will listen to him. Couple of drops in the ASA will do it. Hope you like it...I really did!:D :D :D

[Arman/XPM]

Tunaman,
I recieved so many compliments, from people I knew, and didnt know.
They commented on the beauty of this bad boy....
The gun performed flawlessy at 275fps, the only thing that I thought weird, was on some shots, the balls went crazy.
Other than that, it performed greatly.

[Failure]

paint dimpling?

[Arman/XPM]

Lol, sorry failure, I am not too familiar with the term, paint dimpling? When I shoot, a few balls go about 10 yds, then do a sudden jerk to the right, or left. Should I lower my FPS?

[Arman/XPM]

Guys, I am having a problem with taking off my air adapter to the gun...It seems not to want to come off, here is a pic, maybe you guys will know what to do....

[Cliffio]

to take the macro line out of the fitting all u have to do is push the little metal piece into the fitting and pull the macro line out at the same time.....

sooo
push small metal ring into fitting---pull out on macro line

there ya go
easy as pie

Cliff

[Arman/XPM]

Hmm...does not want to come out.
Is it supposed to be forceful?

[Bartleby]

kind of. you really have to just keep that ring down and pull the macro line out. it might be difficult but that's how ya do it.

[speedballbanks]

do you still have air pressure in the gun ? that might be your problem. lol