ULE Trigger Kits in the Store!!

[Meph]

Yes it does make it easier to rip paint!

So far, had it installed and fired. Got it straight from the factory with a few other AGD products for the store. Lubed up the rings before putting it in as well, installed it. Gassed up.

Pffft Pffft Pffft Shooting beautifully. No short stroking, no half-stroking (chuffing). So far. Just makes it so easy to rip a stream.

Come tomorrow I'll play a few games, see what happens when I'm under pressure and not concentrating on pulling the trigger properly. But overall, my review is looking very very nice!

I'm debating about putting in another shim, getting this thing even lighter. Because right now there's no shootdown. Yet I don't want to go full auto. But I would like to get this to it's maximum performance without crossing the line.

[Jerhew]

well
you might as well give it a try
the more shims you add
the better the pull gets...
and if it starts doubling or going full auto...
just take a shim back out of it
might as well tune it as far as you can

[Meph]

Hmmmm. Might as well.

I'm just honestly afraid of bending the pin! It's not covered under warranty. I don't want to have to buy another.


edit
Good and bad news.

Just did that, added shims. Good news, DIDN'T BEND THE PIN! Yay. That was my actual goal in this, to not bend that.

Bad news. The more shims I added, the easier it became to chuff. With the stock 2 shims, I could just blaze on the trigger. 3rd shim, did just as fast with one or two chuffs. 4th shim, every 10th or so shot a chuff. 5th shim, every other trigger pull = chuff!

But at least no full auto.

So I set it back to 2 shims. So that it's extremely light, yet I don't chuff!

[SlipknotX556]

I want to see these in action, someone make a video.

[Meph]

You won't notice anything different than any other mag firing.

You'll need animation of the on/off pin to see how the ULE works. I could do that myself, if I only did know! I know how the Classic AIR valve on/off works. That's easy. I'm still kind of consufed a little on the RT/X-valve style of on/off pin use.

[Jerhew]

the strange thing is
for as similar as the classic and rt/x valves appear to be
they work completely backwards from each other
i was actually astonished when i finally figured out the air path on an rt/x
as i've said before it's just an engineering masterpiece

but yeah it's hard to tell from watching the gun fire
you have to feel it to understand

[SlipknotX556]

Quesiton Time:


How has it take you to install your ULT kit?

How long did it take you to tune it right?

Is it hard to Install?

Do directions come with the ULT kit?

[AcemanPB]

Originally posted by SlipknotX556
Quesiton Time:


How has it take you to install your ULT kit?

How long did it take you to tune it right?

Is it hard to Install?

Do directions come with the ULT kit?

It's easy to instal (MUCH easier than level 10)

It took me 10-15 minutes tops to tune it right.

All you do is take out your old on/off and drop this one in. It's already put together and ready to go. Once you gas up your gun and see how the trigger is you can add or take away shims to get it how you want it.

It did come with very brief instructions, BlackVCG made a good post about installation in the tech forum.