The TUNAMAX!

[sneakyhacker420]

it would look ALOT nicer with an Evil Rail & on/off combo




otherwise its pretty










btw... some of the pics are kinda out-of-focus

[Angry Man]

Gorgeous, even better looking than x-mags perhaps and lighter too...

I still like your gz more, but maybe that's because I own a gz...not nearly as nice as your clamshelled one, of course.

[Jack & Coke]

Hey guys... I just returned from Sunny and Freakin HOT Palm Springs.

Give me a sec to read through all the questions and I'll reply to each one of you...:)

[sneakyhacker420]

Originally posted by Jack & Coke
Hey guys... I just returned from Sunny and Freakin HOT Palm Springs.

Give me a sec to read through all the questions and I'll reply to each one of you...:)

look into my advice for the Evil bottomline setup

[Angry Man]

No offense, but that thing is virtually identical to a unimount, only bigger and bulkier. No need to replace when unimounts already own all...but all dropless on/off set ups are awesome, so we can all be happy.

Oh, and the tank may be ugly but it's a crossfire peanut and they are so amazing if you use them...compact and balanced.

Btw, which gun of yours is your favorite now that you have this one?

[Jack & Coke]

Originally posted by pito189
That is very nice JC. That is the same rail I want on my Chord E-Mag, whom did you purchase it from?

I bought the whole gun (which includes the rail) from Tunaman.

Originally posted by spydervenom
you take such good pics. :) they look like toys or something.


freakin awesome

Thanks! :) I used a Canon 10D 17-40mm 4/L, PS 7.0, soft focus effect that I use for weddings (gaussian blur, screen mode, curves, etc.).

Originally posted by BlackVCG
I never have been a fan of stubby tanks and how they look, but other than that, it's the nicest ULE-Mag I've seen.

Thanks for the nice complements! :) Regarding the stubby tank - I actually like it a lot. Personal preference I guess... FOR ME, it's the most compact set up to have if you use the tank as a shoulder stock. I shove the tank butt into the top of my should as a pivot point. If I use a drop, then my wrist has to curve around the tank... not as compact. In this setup, my wrist drops straight down from the grip right next to the uni-mount... super thight and compact even while walking the trigger. No elbow or wrist sticking out!

[Jack & Coke]

Originally posted by Skoad
is that a 16 inch cp tip?

anyway....wheres the walking the trigger video!!!!

:)

I can't remember, it's either the 16" or 14" tip (I'll check tomorrow).

VIDEOS: I'll try to record some clips tomorrow. I have an IRQ conflict on my computer (Windows XP), and I've lost my sound!!! I may have to have my friend come over to fix my computer.

If I record video clips, I'll need someone to host them... :)

Originally posted by DiRTyBuNNy
yes..he needs to come out to SC this weekend with all the SoCal AO folks and represent...

DB, did you guys have a great time? Was it hot? LOL! I'll make it to one of these SoCAL AO days soon! Just make sure to PM me... :)

[Jack & Coke]

Originally posted by wobbles82
Holy crud I need some time to myself!! Thats a very nice marker..althoughhhh....a CNC Battery Pack would make it a TOTALLY ULE Emag, lol. Bery nice though, oh and also, hows the weight compared to the GZ? Get vids of both of them firing! You know you wanna!

When I ordered the gun from Tunaman, he did not have the CNC battery pack yet... But, I dod like the clean simple smooth pack myself... maybe because this is my first emag? :) As far as the weight is compared to the GZ, I'll check it out tomorrow and let you know... as well as vids of both guns blazing! Muhahahaha!

Originally posted by dinger
my eyes playing games?? is that a TUNAVALVE?!?!

sawweeet

Tunaman is currently the only AGD authorized person to buy RAW EMAG kits and "build" them into guns for sale. My gun, which includes the ULE body, ULE rail, ULE grip frame, and X-valve were ALL RAW aluminum kits. He polished each peice, then sent it in (same batch = same shade of gloss black anodizing) to get anoed. BTW, AGD black anodize is NOT exactly a mirror "gloss" black. It's more of a satin to flat black anodize. Anyways, after anodizing, he sent it into AGD to get registered, and then on to the laser engravers it went... that's how it got the laser engraved "tuna" ... :)

[Jack & Coke]

Originally posted by FalconGuy016
SO EXTreMELY NICE!! My thoughts on next gun were just swayed (again...)

Now, for the all important, and unanswered question (in both threads). How much that cost you :)

Thanks...:)

How much did it cost me? Ah... hold on, first, let me check to make sure my wife isn't looking...

[Jack & Coke]

Originally posted by JEDI
The battery pack is angled in the flat profile picture. Is that intentional? If so, how's it done?

No, it was not intentional.

I was packing and trying to get ready to take off for Palm Springs... I guess when I was rushing to snap some quick pics for you guys, I carelessly put on the battery pack kinda crocked... Doh!

Originally posted by JEDI



quote:
--------------------------------------------------------------------------------
Originally posted by BlackVCG
I'm pretty sure he doesn't have the battery pack screw tightened. Once tightened it straightens it out, but without it tight it has a bit of wobble in it and probably enough to make it look that way.
--------------------------------------------------------------------------------



Well if thats the case, I call him a slacker. How can you show off your pimp gun, with nice pics, and not even tighten everything down. Minus 5 points.

yeahh... I know... Ma bad... I guess I'll just have to take more purdy pics! :)

[Jack & Coke]

Originally posted by SIGSays
those swivel ellbows?

that thing is very clean looking... when i get money i'll have one too

now... gotta find some damn air fittings.. noone has them

Sorry, no. They're just regular elbows. :) If I see some, I may grab them... but only if they're chrome or black anodized... not purple or something... (no offense capo.. :))

Originally posted by Ov3rmind

It looks like a Check It Unimount. I had one awhile ago, actually I was the first person I could remember that I ever saw owning one (in pics or in real life). I'll give you one thing, it was comfy! However, it was a super pain in the *** to remove, and the setscrews ended up leaving too many marks on the ASA for my taste.

IMO, a standard rail and ASA is better. It's easier to remove and puts your tank in the same place. Plus, you wont see the setscrew marks as easily.

I like the UNI-MOUNT because:

1. You can vent off the residual high line pressure (because of level 10) when you're done shooting.

2. Low profile

I agree with you though about the scratches and marks and how it's a pain removing the mount.

[trev_pbller]

So, I guess I was correct in thinking that AGD does infact engrave the tuna on there as well as the emax at the same time? So thats what he meant when he told me that the ule kit had arrived, yippe ! I can't wait until mine is finished...

Trev

[Jack & Coke]

Originally posted by i like tictacs
that tank...is so...ugly...

You know this tank's not for everyone...

...only the sexy people!

Originally posted by sneakyhacker420
it would look ALOT nicer with an Evil Rail & on/off combo



otherwise its pretty

btw... some of the pics are kinda out-of-focus

Hmmm... thanks for the suggestion... but no thanks!

out-of-focus?

Gosh darn that shallow depth of field!

[Angry Man]

I LOVE THAT GUASSIAN BLUR EFFECT

I've used it a lot, I think it's used in anything that needs a sense of warmth, but it makes any photo look good especially if the background is a solid color. I wish I knew how to use curves though, I just autolevels it then fade autolevels cause it's so fast and comes out alright most of the time.

[Jack & Coke]

Originally posted by Skoad


is that a 16 inch cp tip?

No... it's a 14 inch cp tip. I used a 17-40 mm wide angle lens for that picture.

At the close distance I shot it at, it makes it appear larger than normal.