New Warpfeed electronics

[Strider]

Nice Jim.

You mentioned earlier you were looking at doing a screen of some sort. How does one adjust the settings currently?

[WickedAirSportz]

Screen? No, I didn't state that.

You program the spin duration, spin speed/torque, and sensitivity/polarity using the push button. This button also turns the unit on/off and primes it.

[Sparks]

How will the board be activated? I have a PTP warp with the external piezo sensor, which I no longer have. Is there an on-board sensor, or will I need to find a new one? Also, if no on-board sensor, does this have the contacts for the AGD internal sensor?

[WickedAirSportz]

The TurboWarp has the same input/output as the stock electronics. You can use the stock internal sensor or the pro-team external sensor. No sensor is included.

[Strider]

Originally posted by WickedAirSportz
Screen? No, I didn't state that.

Woops, sorry, I misread something earlier...

You program the spin duration, spin speed/torque, and sensitivity/polarity using the push button. This button also turns the unit on/off and primes it.

I guess my question was how do you tell what setting your on and what your setting it too?

[WickedAirSportz]

You know what setting you are on by programming the unit when you first get it. You can also check the settings.

There are a series of push button events that determine the various programming modes. It sounds a lot more complicated than it really is. I use the same system for the Equalizer boards, and people find that very easy to use.

[sniper1rfa]

sounds the same as the morlock board by KM2.

pretty simple, when you get used to it.

[Scorch]

I can't wait for the TurboWarp!

I read the post regarding intellifeed control for the loader... I agree with WAS that its not needed (anymore).

Here's my old angel with intelli-controlled rev (true 18v powered not from the angels battery) and intelli-controlled warpfeed (12v mod)


This is how I did it
Its a lot of wiring! I'll be shooting a new electro shortly. I hope the turbowarp will be out soon so I don't have to breakout my solder gun

Scorch

[LoveMyMagMoreThanYou]

Any more news on the board?

[Outlaw5]

New WAS Board for the Warp

I was wondering if there was anymore information on this new board myself. I'm sure you've been busy but any information on this Mr. Drew would be appreciated. I know of at least three boards you could sell to me and once I get mine in there will be a few more in my neck of the woods in Fayetteville,NC. Thanks for your time and hope to here from you soon. V/R

[ScatterPlot]

Goin back to what Scorch said a sec ago, I wanted to brag on meself for a sec. I made a little gizmo one time that dually intellifed the revvy and warp ath the same time from an Intelli, but cause it used 2 9V's for the relay (cause thats the smallest I could get right then) and also cause it was inherently kinda slow from the relay (not to me cause I cant shoot really fast) and also cause Im lazy and used electrical tape to mount it it didnt really work too well. I might try a mucho smaller version later, but not quite yet. This new warp thingy sounds awesome though!

[TheTramp]

I'm interested to know if the new Warp board will be compatable with the E-Mag to Warp battery mod being sold at AGDE.

Also, if the new Warp board does a great job conserving batteries would the E-Mag to Warp mod really even be useful/nessasary?

[jayloo]

Are there any updates on this product?

[WickedAirSportz]

I have been a bit busy with the Impulse Equalizer and other stuff. I have been competing with the Warp'd Intimidator, using the TurboWarp and I am confident that is a 100% solid product.

Now its just a matter of fitting it into the production schedule.

I will have this available at the World Cup for anyone to tinker with.

[thecavemankevin]

Originally posted by WickedAirSportz

I will have this available at the World Cup for anyone to tinker with.

so will you just have a proto type to mess with, or actual production boards there?