E/X-Mag 4.0 software, update?

[Swede X-mag]

Originally posted by Miscue
Still working on it - not the software, but the marker.

Any progress?

[Miscue]

Originally posted by Swede X-mag


Any progress?

Yeah, I leveled my agility elf quite a few times in the past few days. Progressing nicely.

I'll let you know when we get there.

[thecavemankevin]

perhaps its time to get rid of your elf and toss troll in there

[MantisMag]

Originally posted by Miscue


Yeah, I leveled my agility elf quite a few times in the past few days. Progressing nicely.

I'll let you know when we get there.

lol. i haven't been able to play at all this weekend. servers have all been full whenever i try.

[RoadDawg]

Hey Q. I had an interesting phenom today. As I shot it kept rebooting. Could it have been a low battery? I charged it 6 hours last night before my day of play so I'm not sure if that's it. Anyways. Just something a bit odd that I'd report and yes I've still kept my 4.0 due to the fact I'm too lazy to send it anywhere and when it works it flies and is ultra sweet. Anyways. Any ideas?

[Miscue]

Originally posted by RoadDawg
Hey Q. I had an interesting phenom today. As I shot it kept rebooting. Could it have been a low battery? I charged it 6 hours last night before my day of play so I'm not sure if that's it. Anyways. Just something a bit odd that I'd report and yes I've still kept my 4.0 due to the fact I'm too lazy to send it anywhere and when it works it flies and is ultra sweet. Anyways. Any ideas?

Eh, sounds like it's broken.

I dunno, look for obvious problems first.

[RoadDawg]

I'll try charging the battery and make sure the connections are fine. I'll report probably later on in the week.

[WARPED1]

Originally posted by Rope a Dope
The slight increase in speed is nice, but I like all the extra features. To delay it in AGD fashion for another 6 years is silly when the only issue with it is some noise from the HES and having it go full auto. That can be resolved easily with a few days of R&D by AGD.

But I'm sure they're busy designing new sight rails and paintball markers that look like M-16's... cause that's what the sport of paintball still is!!



Come on guys... you have the software already made, come up with some little hardware upgrade that costs you $5 to make and charge us $100 to get like every other company out there. I know you can break tradition at least once and screw us out of some extra cash. I wouldn't mind if it means I can get 1 extra BPS over the chrono, cause I'll feel inferior to the next guy that has it, and THAT is how you cash in.

We all know you want the cash Tom, cause "In this country, you gotta make the money first. Then when you get the money, you get the power. Then when you get the power, then you get the woman."-Scarface

Couldn't have said it better myself. Creating "artificial demand" seems to be AGD's thing sinmce the early 90's...........

[John Sosta, AGD Europe]

HES problem poss solution

The full auto issue can can resolved by turning the hall sensor around in the carier by 180 degrees you will also have to turn the magnet around as the magnet will be the wrong polarity after the turning of the hall sensor .
This has worked for us in 12 cases of the the full auto issue, Those of you that are having this problem should try it it involves no soldering and takes about 5 mins.

[Lord_Whoopass]

Q try that... If it takes care of it, that means I might be able to get my hands on the one, the only 4.1 with Knight rider mode... hehe anyways best of luck to ya Q and hope you figure it out... I have faith in you man...

[Miscue]

Originally posted by Lord_Whoopass
Q try that... If it takes care of it, that means I might be able to get my hands on the one, the only 4.1 with Knight rider mode... hehe anyways best of luck to ya Q and hope you figure it out... I have faith in you man...

I tried the equivalent to that over a month ago... except I used a loose magnet instead of the trigger magnet, and a loose HES, and flipped them over. To my understanding, it is the same thing as swapping solenoid wires... reversing the logic - so you have FA when trigger is released (rare, but sustained) instead of when pulled. However, I'll assume that I'm overlooking something and will give it a shot... after class is over on Wednesday.

[WARPED1]

Slightly off topic, but will AGD store still have boards in 2 or 3 months? I might get an Emag without a board in a trade, would need to save etc, so just wondering.

[RoadDawg]

Originally posted by RoadDawg
I'll try charging the battery and make sure the connections are fine. I'll report probably later on in the week.

Q, Just so you know I figured out my problem. I guess the vibration of my emag vibrated the screw holding the board loose and that was causing the issue I was having.

[gibby]

Originally posted by WARPED1
Slightly off topic, but will AGD store still have boards in 2 or 3 months? I might get an Emag without a board in a trade, would need to save etc, so just wondering.

My guess is he will. Good luck with that Emag purchase...hopefully this time, you don't trade it away.

RD, glad to hear you figured out the problem. I was thinking about your problem late last night and wondered if it was a power thing. I had that problem when rebuilding the emag after the re-ano. It wasn't till I scraped off some of the ano did I get constant power. It would turn on and off too.

So...when do we play again?!

[hitech]

Re: HES problem poss solution

Originally posted by John Sosta, AGD Europe
The full auto issue can can resolved by turning the hall sensor around in the carier by 180 degrees you will also have to turn the magnet around...

Can someone tell me how to turn the magnet around? And if soldering is not a problem, which is easier?