Got my Q-Loader today.....

[FutureMagOwner]

details such as sending me a mount like that for free?

anyway im going to ghetto rig it (im the master at this so let me try it first lol) for tank mount i already got the idea just need the pipe and the q loader itself.

and in regards to the halo comment mines been sent back 2 or 3 times now and is still broken from electronics issues... wonder why id want a loader that doesnt have batteries and still feeds fast?

[$tevo]

i think putting it on top the of the tank would be the best place. but i have not seen a pic with it there yet, so i really have no clue

[momags!]

Until you get this thing in hand, it's hard to judge just how long it really is. I have tried several different configurations and under the barrel seems to work best for me. I'll tell you this..it's too long to put on top of the tank. Maybe to the side or underneath but then your marker is WAY off balance and feels very awkward. It's heavier than people give it credit for being. As well, you have to position it so that the reloads go as quickly and easy as possible. If you're a righty, having it on the tank may be very cumbersome.

[bleachit]

attached to the battery pack under the barrel looks like it would be a pain to switch out pods when trying to stay behind a bunker.

[GoatBoy]

Originally posted by momags!
Until you get this thing in hand, it's hard to judge just how long it really is. I have tried several different configurations and under the barrel seems to work best for me. I'll tell you this..it's too long to put on top of the tank. Maybe to the side or underneath but then your marker is WAY off balance and feels very awkward. It's heavier than people give it credit for being. As well, you have to position it so that the reloads go as quickly and easy as possible. If you're a righty, having it on the tank may be very cumbersome.

Actually, as shown in your pic, the under-barrel mount doesn't look half bad. The hose thing needs to be worked out though; looks like you need another elbow coming straight out of the mount to help it point more to the feed port.

I've had this in the back of my mind for a long time now, but since J&C posted that alien gun on the other thread... I've been pondering what that gun with the q-loader mount directly on top to the feed hole a la some of the photoshop pictures would be like. You could mount it similarly on top and it still would be fairly centered since the feed on that thing is so far back. J&C, photoshop honors?


Personally, what I'm thinking right now is the q-loader 45 degress off the top of the gun. Like if you were to take a standard feed mag (feeding in at an angle) and cut the feed neck, and slap the q-loader directly on there.


One thing I forgot to ask... The gun I want to put it on, I probably never go faster than 5bps, if that. (The config is basically a minimag with a 7oz CO2 on the bottomline and a 50 round brass eagle hopper -- very, very light configuration.) The paint breakage thing disturbs me greatly. How hard do you think it would be to reduce the spring pressure so that it's much easier on paint, with the knowledge that feed rate is reduced?

[momags!]

GoatBoy....the spring tension adjustment is VERY easy. It's explained well in the manual.

[The Deacon]

The manual tells you how to do it. Should take you 2 or 3 minutes per pod to reduce pressure, but it seems to be pretty soft on your paint stock and still dumps itself in 1 second without a hose in place.

[RRfireblade]

Originally posted by The Deacon
The manual tells you how to do it. Should take you 2 or 3 minutes per pod to reduce pressure, but it seems to be pretty soft on your paint stock and still dumps itself in 1 second without a hose in place.

Does it really unload 100 balls in a second?

How fast do the balls come flying out?

Do you still need the gun?

I got to check one of these things out. :)

Anyone know when the 140s or coming out,think they'll be much bigger pods or just different internally?

[Maussy]

Here's a video.

Wow. First loader I've ever seen that has recoil!

[Rather]

Originally posted by GoatBoy
You know, I actually emailed them a suggestion. They could just make an angel-threaded mount so it could screw into the ULE or angel. Done deal.

Hmm. that could be better.


But the Warp ULE isn't cocker threaded...or even threaded for that matter, I believe...

Ask them to make the neck of it like a feed elbow and mabey some orings on it...keep it from slipping around... bit more feaseable.

[The Deacon]

Without hoses or anything, it will unload in a second.

Depending on how many prewinds you apply, you could prolly get it to chrono in at 250..

What I'm doing is getting a Rogue ule neck w/ a vert warp adapter to the hose. Should work great.

No 140s, they were having problems making them higher capacity. So don't expect 140s in the near future.

[hostage]

got mine, though mounting it to my x-mag is interesting to say the least. I have it attached to the ASA. It makes my marker about 2ft tall lol! If anyone has any better suggestions I am all ears.
-Doron

[demonguy8]

wouldnt having it directly under the barrel/parrallel to the barrel interfer with wrapping an airball bunker?....

it would SEEM that mounting it under the barrel vertical would be the best spot for use on airball fields (albeit make your marker too tall for playing short bunkers?) but then Im sure as heck not gonna buy one till I can try it...


Any you guys who have one care to comment on this?

[The Deacon]

Doubt anyone can, don't think many of us have gotten out on the field with em yet.

[Gadget]

Seems to me that the best mounting point would be something similar to where the warp sits but a bit further forward and higher up.

A bracket which attaches to the base of the grip and comes out diagonally forwards AND diagonally upwards as well - so the connector for the qloader would sit alongside the E-Mag jewel, with the pod running backwards past the grip and slightly above and to the side of your tank.