AGD - auto response and scenarios?

[shatter_storm]

I'd be game buying one of these from a custom shop as long as it's not ludicrously expensive. Heck, I'd buy an original one but they're harder to find than z-grips, which is what I'd get first. :P Or maybe an autoresponse z-grip, hmm...

[White Wolf]

I don't think there is enough money in this to be production but i would not mind contributing to a "open source" group to work on this. Since Tom dosent want to make any money on it I wouldn't feel right making cash of his idea. I'll volnteer to CAD the parts and post them for anyone to make there own parts and I can probly do a limited run of the parts at cost if there is enough interest in this....say 25 or so people?

We'd also need some one to work on the spring issues and the frame modification.

Also, it was not noted anywhere else but the original frames had a "tourney lock" for these frames to only shoot normal semi auto, sadly thats the only part i still have from my frame circa 1997 or so.

So if some one will lone me a frame for a week to CAD the internal parts, I'll return it with a Truth series barrel for free.

[TAW]

I have a spare AutoResponce frame I could lone you if people really are interested in making the internal parts.

[danheneise]

don't know if anyone has said or even tried this yet but wouldn't that rock with a ult and an xvalve?, Tom have you tried this setup yet?

[JoshK]

Awww...i wish I had one...I Want one of your barrels REALLY bad...

[White Wolf]

Its been 7 years since i last had an AR frame but from what I remember the Reactivness of the trigger made the long hard pull alot more managable, this was on an old school RT with 1200 psi input. When used on Normal mags (of the day) it seemed less then thrilling. So I'd assume these would not work well with the ULT at least if the purpose was pure speed.

[nevets11_2003]

autoresponse

so some one here is going to make a autoreponse trigger, or just the internals if so what frame would they fit in? are you (who ever you are) going to sell them, ive been looking for one

[White Wolf]

I think the bsics steps, at least as far as Iwas looking at is first to get a good CAD of the parts and freely publish that. This would be for anyone to make there own. Second if there was enough demand I can make a small run of the guts, at cost, if some one else can do the work on the frames and find the springs.

Is this all likely to happen? probly not. Most likely not enough interst and no one willing to do the other work needed to do complete frames. But at least it was a good idea.

[Muzikman]

If ya want, I can take my frame to my old work and have the draftsman there measure and draw all the parts.

[cledford]

If you check out the Automag patent there are some drawings of the guts also - I'm reasonably sure someone could figure out the dimensions from the drawing - the problem is that the drawing is a little rough...

http://airsoldier.com/~haveblue/tech/patents/US005280778.pdf

-Calvin

[azzkikr]

well i have a old AR frame i would be willing to send to WW if enough people show interest, is so include myself in that bunch.

AZZKIKR

[moed59]

i want

one