AO: We are back from the dead... again! After an 18 day outage, we are finally alive and well. Who knew how complicated updating software/databases from 2008 would be. I still have alot of tweaks to make, but my main goal was getting everything patched and updated to 2026.
Vbulletin 6 has changed alot since 2008 so we will have a ton of new features to dig into.
if its rip drive you have a jam... ( hapend to me all da time...)... just twis the rip drive thing around a coulple times till it stopz... if not the baterie hog needs new batereis
the lights you see flashing are the z-code software telling you theres an internal jam best thing to do is check the drive cone, if that seems fine your gonna have to take it apart and check that everything internally is setup correctly
Ok, dont listen to anyone else. What you have is Z-code on your halo. Turn yours on, and see if it "pulses" three times, and then the LED will blink, most likely Green and then Red in rapid consession. What it probably is, is underneath the drive cone, there are 3 screw and nut sets, they are probably screwed in too much, and pushing up the drive cone. Take apart the halo and back off the screws a bit and replace the batteries, making sure you use alkaline batteries.
You can kill our leader, but you will never stop the revolution!
- R.I.P. LPB
Comment