40 bps halo mod

[yakitori]

ok, read some of the pbn thread, low batt light on seems normal, and, some say it burns up the motor, others beg to differ, so, seems like your taking a risk with it, i think i will just install an on/off switch for it, see what difference it makes on the field if any, then decide to keep it or not

edit- feeds a pod in under 3 seconds now.....:dodgy:

-also sounds like a power saw while it does it

edit- already broke a fin off my drive cone just testing a few hoppers through it, gonna try and run it with one 9.6v rather than two and see how it does

also, the on/off switch works, and will be preety handy, if it runs of 1 battery, use that till it drains it, then switch to regular halo for the rest of the day

I think that unregulated voltage is not good for the motor. The ppl that beg to differ probably just havent had a problem YET. Im sure they will come around. .

I ended up buying an angry board for mine. Works great. I also put a critical delrin drive cone in it w/ the stainless steel pin and delrin spring housing. Great product. They can be dyed too from what Ive heard, although I dont mind it being white. .

If you have to replace the drive cone on your halo, go ahead and do it w/ a delrin one. Zenitram is only 20 bucks. Critical is 35 and both I think have a lifetime warranty. Only the critical one comes w/ the delrin spring housing too. Eventually that will be the next thing to break if you dont replace the it.

[68magOwner]

If you have to replace the drive cone on your halo, go ahead and do it w/ a delrin one. Zenitram is only 20 bucks. Critical is 35 and both I think have a lifetime warranty. Only the critical one comes w/ the delrin spring housing too. Eventually that will be the next thing to break if you dont replace the it.

yeah, was planning to pick up a derline cone at our next CFOA, some one has a booth with them. With the on/off switch on it now, i think i will turn it on just for some ooh's and aww'es at the field, but, probably never really use it much, still fun.

[Lurker27]

VR1 = Voltage regulator

Let's bypass that.

And give the motor full current.

Just a matter of time, guys.

[Rift]

Cool mod for however long it may last but seriously has anyone actually out shot there halo b's to even warent such a mod? Seems kinda pointless.

[BigEvil]

Oh... it does...

http://www.blazestorm.net/omghalo.wmv

There's my halo w/ it ...

WOW.. sounds alot like my blender. (Coincidence?)

[Boy_Wonder]

VR1 = Voltage regulator

Let's bypass that.

And give the motor full current.

Just a matter of time, guys.

/agree

Do you really need speeds that fast anyway? 40 bps? I would rather not ruin my hopper.

[Lurker27]

Thing is, it's not even the board that will fry. It's more than likely the motor, which really puts the user in hot water.

[jenarelJAM]

you know, if odyssey had wanted their board to go 40 bps, they would have just not included the voltage regulator. It would have been a great selling point... 40 bps loader! Instead, they DID include the voltage regulator, i wonder why...

[AGD202]

i dont see why u people think that making ur halo feed faster will benefit u more.... u cant shoot more than 15 bps semi auto for more than a second... and u willl NEVER in ur life out shoot a halo unless the batteries are dead.

[calcan311]

The only use for this mod is so people can see how fast their gun can shoot paint on ramping or full auto. Just for bragging rights. Probably only 1% of people can out shoot a halo leagley.

[frop]

^^More like 0.00000013578% to 0%.

[gc82000]

My teammate has this mod and it drained his batteries after only an hour. He took it out and just got a Vboard.

[MonsterMag]

I got 1 qestion
On the z code stock board theres a square thing with w a round circel that rotates , what does it do? What happens if I turn it?