Morlock Board Problems

[SpitFire1299]

Yes, check the debounce. The Pred code uses 1/4 ms increments for debounce, so if you set it to 5, you really only have a debounce of 1.25ms, which is not enough.

Set the debounce to about 25 (that would be 6.25 ms) and see if that helps tame it down. If 25 won't do it, try 50 (12.5ms), if THAT won't do it, replace the trigger switch.

That is of course assuming that you really have it set to semi-auto in by setting register #1 to 1.

If it won't take any programming, then the tournament lock is on. Turn both little dipp switches on the board to "off" and try again.

I tried all those out, and i made sure by trying them again. Im going to send it to TAG and have it reflashed, or looked at.